Cylinder Head Valves
Show/hide table
Illustration 1 | g02712456 |
Show/hide table
Specification for 300-5527 Cylinder Head Gp | |||
Item | Qty | Part | Specification Description |
1 | 12 | 212-0932 Inlet Valve | Before assembly, coat the inlet valve stem with clean engine oil.
Stem diameter is Valve head diameter is Face angle of valve is 19.25 ± 0.25 degrees. |
2 | 12 | 212-0933 Exhaust Valve | Before assembly, coat the exhaust valve stem with clean engine oil.
Stem diameter is Valve head diameter is Face angle of valve is 19.25 ± 0.25 degrees. |
3 | 24 | 4N-5906 Spring | Length under test force is Test force is Free length after test is |
4 | 12 | 213-7536 Valve Guide | Bore of the inlet valve guide before installation is Height of the inlet valve guide (A) from the top of the cylinder head to top of the valve guide is |
5 | 12 | 213-7537 Valve Guide | Bore of the exhaust valve guide before installation is Height of the exhaust valve guide (B) from the top of the cylinder head to top of the valve guide is |
6 | 12 | 214-3286 Valve Seat | Bore in cylinder head for the inlet valve seat is Face angle of the inlet valve seat is 20.25 ± 0.50 degrees. Outside diameter of face of the inlet valve seat is |
7 | 12 | 212-0936 Valve Seat | Bore in cylinder head for the exhaust valve seat is Face angle of the exhaust valve seat is 20.25 ± 0.25 degrees. Outside diameter of face of the exhaust valve seat is |
Caterpillar Information System:
CG137-08 and CG137-12 Generator Sets Cylinder Head
3500C Marine Engines Refill Capacities
2011/09/20 Updated Engine Diagnostic Publications for Certain C7 and C9 ACERT Powered Machines Is Available {1000, 1250, 1450}
CG137-08 and CG137-12 Engines Air Starting Motor - Remove and Install - Alternate Air Starting Motor - TDI
CG137-08 and CG137-12 Engines Air Starting Motor - Remove and Install
CG137-08 and CG137-12 Generator Sets Camshaft
C15 Engines for Combat and Tactical Vehicles Cooling System
NEHS1120: Truck Body Lifting Pins {0599, 0629, 0632, 0757, 1122, 7006, 7006, 7258} NEHS1120: Truck Body Lifting Pins {0599, 0629, 0632, 0757, 1122, 7006, 7006, 7258}
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Crankcase Pressure (Blowby) - Test
C2.6 and C3.3B Tier 2 and EU Stage 2 Engines for Caterpillar Built Machines Engine Speed - Check
C15 Engines for Combat and Tactical Vehicles Cooling System - Check - Overheating
2011/10/19 A New Product Link Registration/Activation Process Now Available For Product Link (PL) 522 and 523 {7606}
CG137-08 and CG137-12 Generator Sets Exhaust Bypass Valve
2011/11/10 Spacers have been Added to the Shaft Shoulder of the Console Support on Certain Cat Excavators {7324}
G3500 Valve Runout Tool{0760, 1100, 1101, 1103, 1104, 1105} G3500 Valve Runout Tool{0760, 1100, 1101, 1103, 1104, 1105}
2011/09/28 New Rocker Arm Assemblies Are Available for Certain C15 Truck Engines {1102, 1123}
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Generator Lead Connections
3512, 3508 and 3516 Generator Sets Refill Capacities
3500 Generator Sets Coolant (DEAC) - Change
3500 Generator Sets Coolant (ELC) - Change
349F and 352F Excavators Hydraulic System Automatic Travel Speed Control - Test
3500 Generator Sets Coolant Level - Check
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Disassemble
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Assemble