Air Starting Motor - Remove and Install
拆卸步骤
Show/hide table
发动机的意外启动会对在设备上工作的人员造成伤害或死亡。 为避免发动机意外启动,将蓄电池负极(-)端子上的蓄电池电缆拆下。 将所有拆下的蓄电池电缆末端的金属表面用胶布完全粘住,以防止其与其它的金属表面接触而激活发动机的电子系统。 在启动/停止开关的位置上放置“不要操作”的标签,以通知他人该设备正在维修之中。 |
- 将燃油从空气马达润滑器组件 (1) 中排出。
Show/hide table
图 1 | g02712053 |
- 断开线束组件 (2) 。 拆下电磁阀 (3) 。
- 拆下软管组件 (4) 和弯头适配器
- 断开减压阀 (5) ,然后拆下软管组件 (7) 。
Show/hide table
图 2 | g02712064 |
- 拆下空气马达润滑器组件 (1) 。
- 拆下螺栓 (8) 。 拆下空气起动马达 (9) 、托架和密封垫。 废弃密封垫,以新密封垫更换进行安装。
Show/hide table
图 3 | g02712069 |
安装步骤
- 按与拆卸相反的顺序安装起动马达 (9) 。
- 安装后,向空气马达润滑器组件 (1) 加注柴油。
Caterpillar Information System:
CG137-08 and CG137-12 Generator Sets Camshaft
C15 Engines for Combat and Tactical Vehicles Cooling System
NEHS1120: Truck Body Lifting Pins {0599, 0629, 0632, 0757, 1122, 7006, 7006, 7258} NEHS1120: Truck Body Lifting Pins {0599, 0629, 0632, 0757, 1122, 7006, 7006, 7258}
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Crankcase Pressure (Blowby) - Test
C2.6 and C3.3B Tier 2 and EU Stage 2 Engines for Caterpillar Built Machines Engine Speed - Check
C15 Engines for Combat and Tactical Vehicles Cooling System - Check - Overheating
2011/10/19 A New Product Link Registration/Activation Process Now Available For Product Link (PL) 522 and 523 {7606}
CG137-08 and CG137-12 Generator Sets Ignition Transformer
CG137-08 and CG137-12 Generator Sets Gas Engine Ignition
CG137-08 and CG137-12 Generator Sets Gas Pressure Regulator
2011/08/26 A New Cylinder Head Group and Tube Assembly Are Available for Certain C9 Marine Engines {1100, 1714}
2012/02/27 New Fuel Injector Lines Groups are Used for C175-16 Generator Set Engines {1252, 1254}
CG137-08 and CG137-12 Engines Air Starting Motor - Remove and Install - Alternate Air Starting Motor - TDI
2011/09/20 Updated Engine Diagnostic Publications for Certain C7 and C9 ACERT Powered Machines Is Available {1000, 1250, 1450}
3500C Marine Engines Refill Capacities
CG137-08 and CG137-12 Generator Sets Cylinder Head
CG137-08 and CG137-12 Generator Sets Cylinder Head Valves
CG137-08 and CG137-12 Generator Sets Exhaust Bypass Valve
2011/11/10 Spacers have been Added to the Shaft Shoulder of the Console Support on Certain Cat Excavators {7324}
G3500 Valve Runout Tool{0760, 1100, 1101, 1103, 1104, 1105} G3500 Valve Runout Tool{0760, 1100, 1101, 1103, 1104, 1105}
2011/09/28 New Rocker Arm Assemblies Are Available for Certain C15 Truck Engines {1102, 1123}
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Generator Lead Connections
3512, 3508 and 3516 Generator Sets Refill Capacities
3500 Generator Sets Coolant (DEAC) - Change