Engine Oil Filter Base
Show/hide table
| |
| Illustration 1 | g02678216 |
Show/hide table
| Specification for 344-5150 Engine Oil Filter Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 242-3864 Spring | Length under test force is |
| Test force is |
|||
| Free length after test is |
|||
| 2 | 1 | 1R-1808 Engine Oil Filter | Lubricate seal of the engine oil filter with clean engine oil. |
Show/hide table
| |
| Illustration 2 | g02678217 |
Show/hide table
| |
| Illustration 3 | g02678219 |
|
Detail of area B | |
Show/hide table
| Specification for 344-5150 Engine Oil Filter Gp | |||
| Item | Qty | Part | Specification Description |
| 3 | 1 | 2P-4304 Hollow Stud | Torque to |
| C | - | - | Length for applying red Loctite 271 to the threads of the hollow stud is |
| Tighten the bolts for the oil filter base assembly in the numerical sequence as shown in Illustration 2. | |||
Caterpillar Information System:
C4.4 Marine Generator Set Emergency Stopping
TA19 M4WD Agricultural Transmission Transmission System
TA19 M4WD Agricultural Transmission General Information
Retrofitting a Cat 270 Air Compressor with a BA-921 CR Air Compressor on Certain C13 and C15 On-Highway Engines{1803} Retrofitting a Cat 270 Air Compressor with a BA-921 CR Air Compressor on Certain C13 and C15 On-Highway Engines{1803}
2011/08/04 Correction to Troubleshooting, SENR6493 , "3512 Engine Oil Well Service" {1265, 1901}
3516C Generator Set Engines Sensor Signal (Analog, Passive) - Test
C4.4 Marine Generator Set Generator Set Vibration - Test/Record
C4.4 Marine Generator Set Product Description
C3.4B Industrial Engine Engine Oil Pan - Cast Iron Oil Pan
C3.4B Engines For Caterpillar Built Machines Fan Drive
C9.3 Tier 4 Final Engines Camshaft
3516C Generator Sets Reference Material
C13, C15, and C18 Tier 4 Final Engines Engine Oil Filter Base
C3.4B Engines For Caterpillar Built Machines Electronic Control Module
Retrofitting for Ultra Lean Burn (ULB) on a G3512 Engine{1000, 775E} Retrofitting for Ultra Lean Burn (ULB) on a G3512 Engine{1000, 775E}
C27 and C32 Industrial Engines Auxiliary Drive (Front) - Remove and Install
3516C Generator Set Engines Sensor Signal (PWM) - Test
C27 and C32 Industrial Engines Auxiliary Drive (Front) - Disassemble
C27 and C32 Industrial Engines Auxiliary Drive (Front) - Assemble
CG137-08 and CG137-12 Industrial Engines Sensor Signal (Analog, Active) - Test
Checking the High-Pressure Relief Valve for Leakage on C6.6 and C4.4 Engines{1288} Checking the High-Pressure Relief Valve for Leakage on C6.6 and C4.4 Engines{1288}
TA19 M4WD Agricultural Transmission Location of Electronic Components for Transmission System
2013/08/21 A New Oversized Cylinder Bore Liner Seal Insert Is Available for 3500 Engine Cylinder Block Salvage {1201, 7555}
3516C Generator Set Engines Sensor Supply - Test