C9.3 Tier 4 Final Engines Caterpillar


Camshaft

Usage:

D6T 2B3


Illustration 1g02676039

Table 1
Specification for 294-3592 Camshaft As 
Item  Qty  Part  Specification Description 
107-7694 Thrust Plate  Thickness is 4.7 mm (0.19 inch)
Diameter of the camshaft journal is 65.126 ± 0.013 mm (2.5640 ± 0.0005 inch)


Illustration 2g02676040

Table 2
Specification for 294-3592 Camshaft As 
Item  Qty  Part  Specification Description 
Specified camshaft lobe lift for: 
Inlet lobe is 9.37 mm (0.369 inch).
Exhaust lobe is 7.35 mm (0.289 inch).
Use the following procedure in order to determine the actual camshaft lobe lift:
1. Measure camshaft lobe height (B).
2. Measure the base circle (C).
3. Subtract the base circle (C) from the camshaft lobe height (B). The difference is the actual camshaft lobe lift. 
Maximum permissible difference between actual lobe lift and the specified lobe lift of a new camshaft is ± 0.10 mm (0.004 inch)

Caterpillar Information System:

3516C Generator Sets Reference Material
TA19-M4WD OEM Agricultural Transmission Transmission Suction Screen - Clean
3516C Generator Sets General Maintenance Information
TA19-M4WD OEM Agricultural Transmission Transmission Oil Level - Check
TA19-M4WD OEM Agricultural Transmission Transmission Oil - Change
TA19-M4WD OEM Agricultural Transmission Breather (Transmission) - Clean
2011/09/14 A New Oversized Cylinder Bore Liner Seal Insert Is Available for 3500 Engine Cylinder Block Salvage {1201, 7555}
TA19-M4WD OEM Agricultural Transmission Capacities (Refill)
TA19-M4WD OEM Agricultural Transmission Lubricant Viscosities
TA19-M4WD OEM Agricultural Transmission Lifting and Tying Down the Transmission
TA19-M4WD OEM Agricultural Transmission Transmission Warm-up
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Fire Extinguisher Location
C3.4B Engines For Caterpillar Built Machines Fan Drive
C3.4B Industrial Engine Engine Oil Pan - Cast Iron Oil Pan
C4.4 Marine Generator Set Product Description
C4.4 Marine Generator Set Generator Set Vibration - Test/Record
3516C Generator Set Engines Sensor Signal (Analog, Passive) - Test
2011/08/04 Correction to Troubleshooting, SENR6493 , "3512 Engine Oil Well Service" {1265, 1901}
Retrofitting a Cat 270 Air Compressor with a BA-921 CR Air Compressor on Certain C13 and C15 On-Highway Engines{1803} Retrofitting a Cat 270 Air Compressor with a BA-921 CR Air Compressor on Certain C13 and C15 On-Highway Engines{1803}
TA19 M4WD Agricultural Transmission General Information
TA19 M4WD Agricultural Transmission Transmission System
C4.4 Marine Generator Set Emergency Stopping
C9.3 Tier 4 Final Engines Engine Oil Filter Base
C13, C15, and C18 Tier 4 Final Engines Engine Oil Filter Base
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.