New Relay and Relay Socket Are Now Used with EMCP3 Control Panel On Certain 3406C and C18 Generator Sets {4490, 4493}
- Generator Set:
- 3406C GEN SET (S/N: C2G1-UP; C8G1-UP; C2Y1-UP)
- C18 GEN SET (S/N: G4C1-UP; N1C1-UP; M1Z1-UP)
Description of Change: The EMCP 3 control panel in 3406C and C18 Generator Sets now use additional relay and relay socket to handle the inrush current from the 24V DC shunt trip.
Adaptable To:
Show/hide table
Illustration 1 | g02673696 |
The routing of the EMCP 3 control panel wiring has been modified to redirect the output signal from the output relay by using an additional 338-9652 Relay and 333-7901 Relay Socket. The 338-9652 Relay protects the EMCP 3 panel from possible damage due to the inrush current from the 24V DC shunt trip.
The new 338-9652 Relay and 333-7901 Relay Socket is adaptable to and is effective in production for the machines that are listed in Table 1.
Show/hide table
Sales Model     | Adaptable Serial Number     | Effective Serial Number     |
---|---|---|
3406C     | S/N:C2G1-6191     | S/N:C2G6192-UP     |
S/N:C2Y1-2194 | S/N:C2Y2195-UP     | |
S/N:C8G1-1011 | S/N:C8G1012-UP     | |
C18     | S/N:G4C1-3272     | S/N:G4C3273-UP     |
S/N:M1Z1-1382 | S/N:M1Z1383-UP     | |
S/N:N1C1-320 | S/N:N1C321-UP     |
Caterpillar Information System:
C3.4B Engines for Caterpillar Built Machines Engine Oil Pump - Inspect
C3.4B Engines for Caterpillar Built Machines Engine Valve Lash - Inspect
C3.4B Engines for Caterpillar Built Machines Fuel Injection Timing - Check
C3.4B Engines for Caterpillar Built Machines Air in Fuel - Test
C3.4B Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
C3.4B Engines for Caterpillar Built Machines Valve Guide - Inspect
C9.3 Tier 4 Final Engines Fuel Injector
3516C Generator Sets Burn Prevention
3516C Generator Sets General Hazard Information
TA19 M4WD Agricultural Transmission Transmission
C175-16 Locomotive Engine Turbocharger Inlet Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines Fuel Filter Base
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Daily Inspection
G3500B Engines Exhaust Bypass Valve - Wastegate
C13, C15, and C18 Tier 4 Final Engines Cylinder Head Valves
C13, C15, and C18 Tier 4 Final Engines Cylinder Head
2013/08/21 Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {1201, 1216}
Correct Combinations of Connecting Rods Allowed in Remanufactured Cylinder Packs for Certain C13 Engines{1218, 1225, 1239} Correct Combinations of Connecting Rods Allowed in Remanufactured Cylinder Packs for Certain C13 Engines{1218, 1225, 1239}
3516C Generator Set Engines Emergency Stop - Test
3406C Industrial Engine Safety Messages
3516C Generator Set Engines Prelubrication - Test
A New V-Band Clamp and New Turbochargers Are Used in Certain 789C, 793C, and 793D Off-Highway Truck Engines with Low Altitude Arrangements {1052, 1053} A New V-Band Clamp and New Turbochargers Are Used in Certain 789C, 793C, and 793D Off-Highway Truck Engines with Low Altitude Arrangements {1052, 1053}
3500 Industrial Engines Fuel Priming Pump
3516C Generator Set Engines Fumes Disposal Filter