C3.4B Engines for Caterpillar Built Machines Caterpillar


Engine Oil Pump - Inspect

Usage:

CD-44B 398

  • 从发动机上拆下机油泵。

    1. 清洁发动机机油泵。

    1. 查看金属上有无裂纹,或发动机机油泵有无其他损坏。 如有必要,更换发动机机油泵。

    1. 将机油泵安装到发动机上。

    1. 将发动机机油压力安全阀从发动机上拆下。

    1. 检查发动机机油压力安全阀有无磨损或损坏。 如有必要,更换发动机机油压力安全阀。
  • Caterpillar Information System:

    C3.4B Engines for Caterpillar Built Machines Engine Valve Lash - Inspect
    C3.4B Engines for Caterpillar Built Machines Fuel Injection Timing - Check
    C3.4B Engines for Caterpillar Built Machines Air in Fuel - Test
    C3.4B Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
    C3.4B Engines for Caterpillar Built Machines Valve Guide - Inspect
    C9.3 Tier 4 Final Engines Fuel Injector
    3516C Generator Sets Burn Prevention
    3516C Generator Sets General Hazard Information
    TA19 M4WD Agricultural Transmission Transmission
    C175-16 Locomotive Engine Turbocharger Inlet Pressure Sensor
    C13, C15, and C18 Tier 4 Final Engines Fuel Filter Base
    2011/08/04 New Valve Train Components for C175 Generator Set Engines {1102, 1121, 1123, 1209}
    2011/08/09 New Relay and Relay Socket Are Now Used with EMCP3 Control Panel On Certain 3406C and C18 Generator Sets {4490, 4493}
    345D MHPU and 349D MHPU Mobile Hydraulic Power Units Daily Inspection
    G3500B Engines Exhaust Bypass Valve - Wastegate
    C13, C15, and C18 Tier 4 Final Engines Cylinder Head Valves
    C13, C15, and C18 Tier 4 Final Engines Cylinder Head
    2013/08/21 Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {1201, 1216}
    Correct Combinations of Connecting Rods Allowed in Remanufactured Cylinder Packs for Certain C13 Engines{1218, 1225, 1239} Correct Combinations of Connecting Rods Allowed in Remanufactured Cylinder Packs for Certain C13 Engines{1218, 1225, 1239}
    3516C Generator Set Engines Emergency Stop - Test
    3406C Industrial Engine Safety Messages
    3516C Generator Set Engines Prelubrication - Test
    A New V-Band Clamp and New Turbochargers Are Used in Certain 789C, 793C, and 793D Off-Highway Truck Engines with Low Altitude Arrangements {1052, 1053} A New V-Band Clamp and New Turbochargers Are Used in Certain 789C, 793C, and 793D Off-Highway Truck Engines with Low Altitude Arrangements {1052, 1053}
    3500 Industrial Engines Fuel Priming Pump
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.