Electronic Control Module (Engine) - Remove and Install
拆卸步骤
- 拆下螺钉 (1) ，然后打开盖 (2) 。
注: 将线束组件放在一边。 必要时，断开所有线束组件。
注: 端子应保持在原位。 如果断开了任一端子，有关端子的正确安装，请参阅系统操作, "电气接头 - 电子控制模块（ECM）接头"中的图 (10) 。
Show/hide table
 | |
| 图 1 | g02637516 |
- 断开接地电缆 (5) 。 拆下螺母 (3) ，然后拆下电子控制模块 (4) 。
Show/hide table
 | |
| 图 2 | g02637578 |
为便于拍照，已拆下线束接头。 | |
- 拆下螺栓 (6) 和密封圈及密封垫。
Show/hide table
 | |
| 图 3 | g02637617 |
Show/hide table
 | |
| 图 4 | g02637656 |
- 拆下螺钉 (7) 和 (8) 。 拆下密封圈螺母和密封垫。
安装步骤
- 按与拆卸相反的顺序安装电子控制模块 (4) 。
- 有关正确的配置参数，请参阅测试和调整, "ECM - 更换"。
Caterpillar Information System:
3516C Generator Set Engines Turbocharger Oil Lines
3500C Marine Engines Cylinder Head
3500B and 3500C Marine Engines Valve Mechanism
C15 and C18 Engines for Caterpillar Built Machines Water Temperature Regulator Housing
3500C Marine Engines Camshaft
C15 and C18 Engines for Caterpillar Built Machines Water Temperature Regulator Housing
3516C Generator Set Engines Fuel Injection Pump
3500C Marine Engines Fuel Transfer Pump
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738} Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
New Oil and Fuel Filters for C7.1, C6.6, and C4.4 Engines{1261, 1263, 1306, 1308} New Oil and Fuel Filters for C7.1, C6.6, and C4.4 Engines{1261, 1263, 1306, 1308}
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
CG137-08 and CG137-12 Engines Engine Support - Remove and Install
3516E Generator Set Engines Exhaust Manifold
G3406 Engine Maintenance Interval Schedule - Standby Generator Set Engines
G3406 Engine Maintenance Interval Schedule - Naturally Aspirated Engines
G3406 Engine Maintenance Interval Schedule - Turbocharged Aftercooled Engines
2011/07/22 Improved Caterpillar Digital Voltage Regulator (CDVR) Is Used for Certain C9, C15, C18, 3300, 3400, G3400, C27, C32, 3500, G3500, and C175 Engines {4467}
G3406 Engine Crankcase Blowby - Test/Record
3500 Engines Air Lines
3500 Engines Air Lines
3500B and 3500C Marine Engines Duplex Engine Oil Filters
349F and 352F Excavators Machine System Specifications Fasteners - Swing Drive and Motor
3500C Marine Engines Crankshaft
349F and 352F Excavators Machine System Specifications Sprocket