Valve Mechanism
Show/hide table
| 图 1 | g02636876 |
|
俯视图 | |
Show/hide table
| 314-7626 气门机构总成和 370-9889 气门机构总成的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 2 | 3J-9196 防松螺母 | 拧紧至扭矩为 |
| 2 | 2 | 7E-6507 固定螺母 | 拧紧至扭矩为 用手开始拧紧盖组件的固定螺母，使接线柱不至出现螺纹交错。 |
| 3 | 1 | 317-1121 防松螺母 | 拧紧至扭矩为 |
| 4 | 1 | 5P-7530 O 形密封圈 | 利用所密封的润滑剂轻轻润滑内孔。 |
| 5 | 2 | 334-1626 螺栓 | 如果拆下螺栓进行维修，则将黑色 Loctite 垫片接合剂涂覆到螺纹上。 |
Show/hide table
| 图 2 | g02636936 |
Show/hide table
| 314-7626 气门机构总成和 370-9889 气门机构总成的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 8 | 1 | 234-2273 摇臂轴 | 直径为 |
| 9 | 2 | 0L-2070 螺栓 | 如果拆下螺栓进行维修，则将黑色 Loctite 垫片接合剂涂覆到螺纹上。 |
| 10 | 1 | 6J-2245 O 形密封圈 | 利用所密封的润滑剂轻轻润滑内孔。 |
| B | - | - | 喷油器摇臂组件 (6) 中的衬套孔径为 |
| C | - | - | 阀门摇臂组件 (7) 中的衬套孔径为 |
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Water Temperature Regulator Housing
3500C Marine Engines Camshaft
C15 and C18 Engines for Caterpillar Built Machines Water Temperature Regulator Housing
3516C Generator Set Engines Fuel Injection Pump
3500C Marine Engines Fuel Transfer Pump
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738} Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
New Oil and Fuel Filters for C7.1, C6.6, and C4.4 Engines{1261, 1263, 1306, 1308} New Oil and Fuel Filters for C7.1, C6.6, and C4.4 Engines{1261, 1263, 1306, 1308}
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
CG137-08 and CG137-12 Engines Engine Support - Remove and Install
CG137-08 and CG137-12 Industrial Engines Throttle Actuator - Test
C11, C13, and C15 On-highway Engines Engine Oil Level - Check
PM820, PM822, and PM825 Cold Planer Fuel Tank Cap Filter - Replace
3500C Marine Engines Cylinder Head
3516C Generator Set Engines Turbocharger Oil Lines
CG137-08 and CG137-12 Engines Electronic Control Module (Engine) - Remove and Install
3516E Generator Set Engines Exhaust Manifold
G3406 Engine Maintenance Interval Schedule - Standby Generator Set Engines
G3406 Engine Maintenance Interval Schedule - Naturally Aspirated Engines
G3406 Engine Maintenance Interval Schedule - Turbocharged Aftercooled Engines
2011/07/22 Improved Caterpillar Digital Voltage Regulator (CDVR) Is Used for Certain C9, C15, C18, 3300, 3400, G3400, C27, C32, 3500, G3500, and C175 Engines {4467}
G3406 Engine Crankcase Blowby - Test/Record
3500 Engines Air Lines
3500 Engines Air Lines
3500B and 3500C Marine Engines Duplex Engine Oil Filters