Fuel Injection Pump
Show/hide table
| |
| Illustration 1 | g03093225 |
Show/hide table
| Specification for the 375-7416 Fuel Injection Pump Gp | |||
| Item | Qty | Part | Specification Description |
| Prior to installation of the fuel injector group, lubricate the bore in the cylinder head with 1P-0808 Multipurpose Grease. Use the clamp to press the injector into the bore. Do not tap on the top surface of the injector. | |||
| 1 | 1 | 7F-8698 Bolt | Torque to |
| A | - | - | Timing dimension is |
| 2 | 1 | 361-9354 Fuel Injection Valve Assembly | Use the following procedure for tightening the fuel injection valve assembly:
Before assembly, lubricate the bore and the threads with vactra No.2 MSDS 5380. |
| 1. Tighten to |
|||
| 2. Turn to reach the final turn angle of 19 ± 1 degrees. | |||
| 3. Final tightening torque should be |
|||
Caterpillar Information System:
3500C Marine Engines Fuel Transfer Pump
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738} Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
New Oil and Fuel Filters for C7.1, C6.6, and C4.4 Engines{1261, 1263, 1306, 1308} New Oil and Fuel Filters for C7.1, C6.6, and C4.4 Engines{1261, 1263, 1306, 1308}
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
CG137-08 and CG137-12 Engines Engine Support - Remove and Install
CG137-08 and CG137-12 Industrial Engines Throttle Actuator - Test
C11, C13, and C15 On-highway Engines Engine Oil Level - Check
PM820, PM822, and PM825 Cold Planer Fuel Tank Cap Filter - Replace
12H, 140H, 143H, 160H and 163H Motor Graders Power Train Magnetic Screen (Transmission)
2012/06/08 A New Cylinder Head Gasket and Spacer Plate Are Used for Certain 3500 Locomotive Engines {1100, 1201, 7555}
2011/07/11 New Seals Are Used on the Power Distribution Boxes of Certain Petroleum Generator Sets {7426, 7555}
Cat® Digital Voltage Regulator Group Support Level
C15 and C18 Engines for Caterpillar Built Machines Water Temperature Regulator Housing
3500C Marine Engines Camshaft
C15 and C18 Engines for Caterpillar Built Machines Water Temperature Regulator Housing
3500B and 3500C Marine Engines Valve Mechanism
3500C Marine Engines Cylinder Head
3516C Generator Set Engines Turbocharger Oil Lines
CG137-08 and CG137-12 Engines Electronic Control Module (Engine) - Remove and Install
3516E Generator Set Engines Exhaust Manifold
G3406 Engine Maintenance Interval Schedule - Standby Generator Set Engines
G3406 Engine Maintenance Interval Schedule - Naturally Aspirated Engines
G3406 Engine Maintenance Interval Schedule - Turbocharged Aftercooled Engines
2011/07/22 Improved Caterpillar Digital Voltage Regulator (CDVR) Is Used for Certain C9, C15, C18, 3300, 3400, G3400, C27, C32, 3500, G3500, and C175 Engines {4467}