3500C Marine Engines Caterpillar


Fuel Transfer Pump

Usage:

3516C BG3


图 1g02577836

表 1
技术规格 - 322-6264 输油泵总成 
项目  数量  零件  技术规格说明 
7C-2870 端头套管  齿轮轴端头套管的内径为 12.783 mm (0.5033 inch)
端头套管的安装深度为 1.5 ± 0.5 mm (0.06 ± 0.02 inch)。 
277-4489 驱动轴组件  齿轮的直径为 29.801 ± 0.006 mm (1.1733 ± 0.0002 inch)
齿轮的长度为 35.347 ± 0.008 mm (1.3916 ± 0.0003 inch)。 
277-4488 惰轮组件  惰轮组件的直径为 29.801 ± 0.006 mm (1.1733 ± 0.0002 inch)
齿轮的长度为 35.347 ± 0.008 mm (1.3916 ± 0.0003 inch)。 

Caterpillar Information System:

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738} Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
New Oil and Fuel Filters for C7.1, C6.6, and C4.4 Engines{1261, 1263, 1306, 1308} New Oil and Fuel Filters for C7.1, C6.6, and C4.4 Engines{1261, 1263, 1306, 1308}
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
CG137-08 and CG137-12 Engines Engine Support - Remove and Install
CG137-08 and CG137-12 Industrial Engines Throttle Actuator - Test
C11, C13, and C15 On-highway Engines Engine Oil Level - Check
PM820, PM822, and PM825 Cold Planer Fuel Tank Cap Filter - Replace
12H, 140H, 143H, 160H and 163H Motor Graders Power Train Magnetic Screen (Transmission)
2012/06/08 A New Cylinder Head Gasket and Spacer Plate Are Used for Certain 3500 Locomotive Engines {1100, 1201, 7555}
2011/07/11 New Seals Are Used on the Power Distribution Boxes of Certain Petroleum Generator Sets {7426, 7555}
Cat® Digital Voltage Regulator Group Support Level
C13 and C15 On-Highway Engines Valve Actuators - Check
3516C Generator Set Engines Fuel Injection Pump
C15 and C18 Engines for Caterpillar Built Machines Water Temperature Regulator Housing
3500C Marine Engines Camshaft
C15 and C18 Engines for Caterpillar Built Machines Water Temperature Regulator Housing
3500B and 3500C Marine Engines Valve Mechanism
3500C Marine Engines Cylinder Head
3516C Generator Set Engines Turbocharger Oil Lines
CG137-08 and CG137-12 Engines Electronic Control Module (Engine) - Remove and Install
3516E Generator Set Engines Exhaust Manifold
G3406 Engine Maintenance Interval Schedule - Standby Generator Set Engines
G3406 Engine Maintenance Interval Schedule - Naturally Aspirated Engines
G3406 Engine Maintenance Interval Schedule - Turbocharged Aftercooled Engines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.