Crankshaft
Show/hide table
| |
| 图 1 | g03334121 |
|
典型示例 | |
Show/hide table
| 技术规格 - 375-3642 曲轴总成、 379-4858 曲轴总成和 386-1487 曲轴总成 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 2 | 7C-6209 止推片 | 止推片只可用于中央主轴承上。 |
| 2 | 8 | 2W-2288 塞 | 拧紧至扭矩为 |
| 3 | 48 | 128-4845 螺栓组件 | 按照以下步骤拧紧螺栓： 1. 组装前，使用 Molylube 润滑剂润滑螺栓螺纹、螺栓杆、垫圈和螺栓头底部。 2.均匀拧紧螺栓至扭矩为 3. 将各螺栓再转动 120 ± 5 度。 |
| B | 32 | 7N-2003 定位销 | 定位销的突出量 (B) 为 |
| - | - | - | 装配到缸体上后，新曲轴的端隙为 |
Caterpillar Information System:
349F and 352F Excavators Machine System Specifications Fasteners - Swing Drive and Motor
3500B and 3500C Marine Engines Duplex Engine Oil Filters
3500 Engines Air Lines
3500 Engines Air Lines
G3406 Engine Crankcase Blowby - Test/Record
2011/07/22 Improved Caterpillar Digital Voltage Regulator (CDVR) Is Used for Certain C9, C15, C18, 3300, 3400, G3400, C27, C32, 3500, G3500, and C175 Engines {4467}
G3406 Engine Maintenance Interval Schedule - Turbocharged Aftercooled Engines
G3406 Engine Maintenance Interval Schedule - Naturally Aspirated Engines
G3406 Engine Maintenance Interval Schedule - Standby Generator Set Engines
3516E Generator Set Engines Exhaust Manifold
CG137-08 and CG137-12 Engines Electronic Control Module (Engine) - Remove and Install
3516C Generator Set Engines Turbocharger Oil Lines
349F and 352F Excavators Machine System Specifications Sprocket
CG137-08 and CG137-12 Engines Electric Starting Motor - Remove and Install
G3406 Engine Engine Mounts - Inspect
3500 Engines Housing (Front)
3500C Marine Engines Gear Group (Front)
2011/10/06 Warning Film Is Available for the High Pressure Fuel Pump on C175-16 Engines {1251, 1290, 7405}
G3406 Engine Fuel Filter Differential Pressure - Check
CG137-08 and CG137-12 Industrial Engines Speed/Timing (Primary) - Test
CG137-08 and CG137-12 Engines Gas Pressure Regulator - Remove and Install
G3406 Engine Spark Plugs - Inspect/Adjust/Replace
2011/09/12 A New Gasket and a New Spacer Plate are Now Used on Certain Reman 3500 Engines {1100, 1201, 7555}
2011/07/14 Glow Plugs on Certain C6.6 Engines {1412}