Fasteners - Swing Drive and Motor
Show/hide table
| |
| Illustration 1 | g03844818 |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 1 | - | - | Prior to assembly, the surfaces must be clean and free of any protective coating. |
| 2 | 20 | 509-7906 Bolt | Before assembly, apply Loctite 242 to the threads. |
| Use the following procedure to tighten the bolts: 1. Tighten the bolts to 2. Turn to an additional angle of 45 ± 5 degrees. |
|||
| 3 | 4 | 096-4755 Pin | Before assembly, apply Loctite C5A Copper anti-seize to the surfaces. |
| 4 | - | - | Prior to assembly into the upper frame, coat the mating surfaces with 8C-8422 Sealant. |
Show/hide table
| |
| Illustration 2 | g03844820 |
|
Detail view of area A | |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 5 | 2 | 5D-1026 Band Clamp | Assemble bolt clamp head to upper side as shown in detailed view to eliminate potential interference between clamp head and valve. |
| Torque to |
Caterpillar Information System:
3500B and 3500C Marine Engines Duplex Engine Oil Filters
3500 Engines Air Lines
3500 Engines Air Lines
G3406 Engine Crankcase Blowby - Test/Record
2011/07/22 Improved Caterpillar Digital Voltage Regulator (CDVR) Is Used for Certain C9, C15, C18, 3300, 3400, G3400, C27, C32, 3500, G3500, and C175 Engines {4467}
G3406 Engine Maintenance Interval Schedule - Turbocharged Aftercooled Engines
G3406 Engine Maintenance Interval Schedule - Naturally Aspirated Engines
G3406 Engine Maintenance Interval Schedule - Standby Generator Set Engines
3516E Generator Set Engines Exhaust Manifold
CG137-08 and CG137-12 Engines Electronic Control Module (Engine) - Remove and Install
3516C Generator Set Engines Turbocharger Oil Lines
3500C Marine Engines Cylinder Head
3500C Marine Engines Crankshaft
349F and 352F Excavators Machine System Specifications Sprocket
CG137-08 and CG137-12 Engines Electric Starting Motor - Remove and Install
G3406 Engine Engine Mounts - Inspect
3500 Engines Housing (Front)
3500C Marine Engines Gear Group (Front)
2011/10/06 Warning Film Is Available for the High Pressure Fuel Pump on C175-16 Engines {1251, 1290, 7405}
G3406 Engine Fuel Filter Differential Pressure - Check
CG137-08 and CG137-12 Industrial Engines Speed/Timing (Primary) - Test
CG137-08 and CG137-12 Engines Gas Pressure Regulator - Remove and Install
G3406 Engine Spark Plugs - Inspect/Adjust/Replace
2011/09/12 A New Gasket and a New Spacer Plate are Now Used on Certain Reman 3500 Engines {1100, 1201, 7555}