349F and 352F Excavators Machine System Specifications Caterpillar


Sprocket

Usage:

352F-VG A9J


Illustration 1g06256533

Table 1
Specification for 115-6399 Sprocket Gp 
Item  Qty  Part  Specification Description 
20(1)  461-3881 Bolt  Before assembly, remove compound, oil and dust from female threads, then apply blue Loctite 243 to threads.
Use the following tightening procedure:

1. Tighten bolts to 250 ± 25 N·m (184 ± 18 lb ft).
2. Turn to an additional angle of 30 ± 5 degrees. 
(1) Number of bolts per swing drive sprocket

Caterpillar Information System:

3500C Marine Engines Crankshaft
349F and 352F Excavators Machine System Specifications Fasteners - Swing Drive and Motor
3500B and 3500C Marine Engines Duplex Engine Oil Filters
3500 Engines Air Lines
3500 Engines Air Lines
G3406 Engine Crankcase Blowby - Test/Record
2011/07/22 Improved Caterpillar Digital Voltage Regulator (CDVR) Is Used for Certain C9, C15, C18, 3300, 3400, G3400, C27, C32, 3500, G3500, and C175 Engines {4467}
G3406 Engine Maintenance Interval Schedule - Turbocharged Aftercooled Engines
G3406 Engine Maintenance Interval Schedule - Naturally Aspirated Engines
G3406 Engine Maintenance Interval Schedule - Standby Generator Set Engines
3516E Generator Set Engines Exhaust Manifold
CG137-08 and CG137-12 Engines Electronic Control Module (Engine) - Remove and Install
CG137-08 and CG137-12 Engines Electric Starting Motor - Remove and Install
G3406 Engine Engine Mounts - Inspect
3500 Engines Housing (Front)
3500C Marine Engines Gear Group (Front)
2011/10/06 Warning Film Is Available for the High Pressure Fuel Pump on C175-16 Engines {1251, 1290, 7405}
G3406 Engine Fuel Filter Differential Pressure - Check
CG137-08 and CG137-12 Industrial Engines Speed/Timing (Primary) - Test
CG137-08 and CG137-12 Engines Gas Pressure Regulator - Remove and Install
G3406 Engine Spark Plugs - Inspect/Adjust/Replace
2011/09/12 A New Gasket and a New Spacer Plate are Now Used on Certain Reman 3500 Engines {1100, 1201, 7555}
2011/07/14 Glow Plugs on Certain C6.6 Engines {1412}
CG137-08 and CG137-12 Industrial Engines Speed/Timing (Secondary) - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.