Turbocharger
Show/hide table
Illustration 1 | g02560057 |
Typical example Front view of engine |
Show/hide table
Specification for 241-3005 Turbocharger Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 4     | 2N-2766 Locknuts     | Torque to 55 ± 5 N·m (41 ± 4 lb ft).     |
2     | 1     | 268-2960 Clamp As     | Torque to 13.6 ± 1.0 N·m (120.0 ± 9.0 lb in).     |
3     | 1     | 9N-2038 Turbine Clamp As     | Use the following procedure to tighten the turbine clamp assembly for the turbocharger: 1. Tighten to 18.1 N·m (160.0 lb in). 2. Loosen to 5.6 N·m (50.0 lb in). 3. Again, tighten to 13.6 ± 1.0 N·m (120.0 ± 9.0 lb in).     |
4     | 4     | 2N-2765 High Temperature Bolts     | Before assembly, apply 4C-5599 Anti-Seize Compound to the threads.     |
-     | -     | -     | Opening pressure of the wastegate is 180.0 ± 4.0 kPa (26.0 ± 0.5 psi).     |
Caterpillar Information System:
C15 and C18 Industrial Engines Electric Starting Motor
C175-16 Locomotive Engine Cylinder Liner
C13, C15, and C18 Generator Set Engines Turbocharger
3500 Engines Engine Oil Filter
C15 and C18 Industrial Engines Electric Starting Motor
UPSB505 Uninterruptible Power Supply UPS Battery - 50Hz Component Location
3516C IMO III Petroleum Engines Engine Oil Cooler - Remove
2011/08/26 A New Wiring Harness Is Used On Certain Commercial Engines {1408, 1900}
UPSB505 Uninterruptible Power Supply UPS Battery - 50Hz General Information
CG137-08 and CG137-12 Engines Product Lifting
XQ125 Generator Set Fuel Tank Water and Sediment - Drain
Additional Procedure when Replacing the Engine, ECM, or CEM Tier 4 Engines{1000, 108D, 108F, 1901} Additional Procedure when Replacing the Engine, ECM, or CEM Tier 4 Engines{1000, 108D, 108F, 1901}
2011/08/23 Introduction of Radiator Protection Screen on C4.4 and C4.4 (Mech) Engines {1353}
C15 and C18 Engines for Caterpillar Built Machines Electric Starting Motor
C9.3 Tier 4 Final Engines Engine Oil Filter Base
C175-16 Petroleum Engines Turbocharger
3500 Engines Engine Oil Cooler
C15 and C18 Industrial Engines Electric Starting Motor
C175-16 Locomotive Engine Gear Group (Rear)
3500 Engines Crankcase Breather
C15 Petroleum Generator Set Engines Exhaust Manifold
G3406 Engine Before Starting Engine
XQ400 Power Module Starting the Engine
C9.3 Tier 4 Final Engines Water Lines