C15 and C18 Industrial Engines Caterpillar


Electric Starting Motor

Usage:

C18 EJG


图 1g02560278

表 1
技术规格,用于 198-7746 电动起动马达总成和 205-7687 电动起动马达总成 
项目  数量  零件  技术规格说明 
6V-8188 螺母  拧紧至扭矩为 30.5 ± 3.5 N·m (269.9 ± 31.0 lb in)。 
206-8787 电磁阀套件  10V 和 25 °C (77 °F) 环境下的电流消耗值:
1. 对于吸合绕组为 97 安培
2. 对于保持绕组为 18 安培 
6V-8188 螺母  拧紧至扭矩为 30.5 ± 3.5 N·m (269.9 ± 31.0 lb in)
蓄电池端子螺母(3)最多可使用三个电缆或导线端子。 两个端子最高不低于 0 AWG。 
095-7930 螺钉  拧紧至扭矩为 1.70 ± 0.25 N·m (15.05 ± 2.21 lb in)。 
6V-8378 螺母  拧紧至扭矩为 2.25 ± 0.25 N·m (19.91 ± 2.21 lb in)。 
螺栓  拧紧至扭矩为 8 ± 3 N·m (71 ± 27 lb in)。 
小齿轮和壳体之间的间隙为 9.1 mm (0.36 inch)。 
当从小齿轮端观看电起动马达时,马达顺时针旋转。
25 °C (77 °F) 时无负载条件
1. 转速为 6900 ± 1800 rpm
2. 电流消耗为 127.5 ± 27.5 安培
3. 电压为 11 V 
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.