Cylinder Liner
Show/hide table
图 1 | g03397584 |
Show/hide table
317-6283 缸套总成的技术规格 | |||
项目 | 数量 | 零件 | 技术规格说明 |
1 | 1 | 381-3969 套筒 | 套筒的平均外径 (B) 为 |
套筒的平均内径 (C) 为 |
|||
套筒的高度 (D) 为 |
|||
2 | 1 | 422-6176 O 形密封圈 | 将缸套装入缸体前,安装 O 形密封圈。 |
安装缸套前,使用肥皂液或 P80 橡胶润滑剂涂覆 O 形密封圈。 | |||
3 | 2 | 253-9950 O 形密封圈 | 将缸套装入缸体前,安装 O 形密封圈。 |
安装缸套前,使用肥皂液或 P80 橡胶润滑剂涂覆 O 形密封圈。 | |||
4 | 1 | 377-8485 缸套 | 缸径 (A) 为 |
缸套的法兰厚度 (E) 为 |
|||
按照以下步骤安装缸套:
1. 将缸套装入缸体前,安装 O 形密封圈。 2. 在缸套孔表面涂膜肥皂液。 3. O 形密封圈膨胀前,立即将缸套安装到缸体中。 |
Caterpillar Information System:
C13, C15, and C18 Generator Set Engines Turbocharger
3500 Engines Engine Oil Filter
C15 and C18 Industrial Engines Electric Starting Motor
UPSB505 Uninterruptible Power Supply UPS Battery - 50Hz Component Location
3516C IMO III Petroleum Engines Engine Oil Cooler - Remove
2011/08/26 A New Wiring Harness Is Used On Certain Commercial Engines {1408, 1900}
UPSB505 Uninterruptible Power Supply UPS Battery - 50Hz General Information
CG137-08 and CG137-12 Engines Product Lifting
XQ125 Generator Set Fuel Tank Water and Sediment - Drain
Additional Procedure when Replacing the Engine, ECM, or CEM Tier 4 Engines{1000, 108D, 108F, 1901} Additional Procedure when Replacing the Engine, ECM, or CEM Tier 4 Engines{1000, 108D, 108F, 1901}
C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor
C13 Tier 4 Final Engines Solenoid Valve - Air Control Valve Gp
C15 and C18 Industrial Engines Electric Starting Motor
C15 and C18 Petroleum Engines Turbocharger
2011/08/23 Introduction of Radiator Protection Screen on C4.4 and C4.4 (Mech) Engines {1353}
C15 and C18 Engines for Caterpillar Built Machines Electric Starting Motor
C9.3 Tier 4 Final Engines Engine Oil Filter Base
C175-16 Petroleum Engines Turbocharger
3500 Engines Engine Oil Cooler
C15 and C18 Industrial Engines Electric Starting Motor
C175-16 Locomotive Engine Gear Group (Rear)
3500 Engines Crankcase Breather
C15 Petroleum Generator Set Engines Exhaust Manifold
G3406 Engine Before Starting Engine