Gear Group (Rear)
Show/hide table
| |
| Illustration 1 | g02562838 |
| (2) Camshaft gear | |
Show/hide table
| Specification for 327-0824 Rear Gear Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 328-7113 Cluster Gear Shaft | Diameter is |
| 3 | 1 | 254-5887 Bushing | Bore in the bushing after installation is |
| Installation depth of the bushing is |
|||
| The mark on the idler gear assembly (4) must be in alignment with the mark on the crankshaft gear (5). | |||
Caterpillar Information System:
C15 and C18 Industrial Engines Electric Starting Motor
3500 Engines Engine Oil Cooler
C175-16 Petroleum Engines Turbocharger
C9.3 Tier 4 Final Engines Engine Oil Filter Base
C15 and C18 Engines for Caterpillar Built Machines Electric Starting Motor
2011/08/23 Introduction of Radiator Protection Screen on C4.4 and C4.4 (Mech) Engines {1353}
C15 and C18 Petroleum Engines Turbocharger
C15 and C18 Industrial Engines Electric Starting Motor
C175-16 Locomotive Engine Cylinder Liner
C13, C15, and C18 Generator Set Engines Turbocharger
3500 Engines Engine Oil Filter
C15 and C18 Industrial Engines Electric Starting Motor
3500 Engines Crankcase Breather
C15 Petroleum Generator Set Engines Exhaust Manifold
G3406 Engine Before Starting Engine
XQ400 Power Module Starting the Engine
C9.3 Tier 4 Final Engines Water Lines
Network Management Card with Modbus for the UPSB505 Uninterruptible Power Supply Web Interface
CG137-08 and CG137-12 Engines Emergency Stopping
3500 Engines Crankcase Breather
C15 and C18 Industrial Engines Flywheel
C15 and C18 Industrial Engines Flywheel
C9.3 Tier 4 Final Engines Valve Mechanism Cover
C32 Marine and Auxiliary Marine Engines Electric Starting Motor