Exhaust Manifold
Show/hide table
Illustration 1 | g02560957 |
Show/hide table
Illustration 2 | g02560958 |
Tightening sequence for the locknuts |
Show/hide table
Specification for 164-4637 Exhaust Manifold Gp | |||
Item | Qty | Part | Specification Description |
1 | 11 | 106-1792 Taperlock Stud | Torque to |
1 | 4S-6137 Taperlock Stud | ||
- | - | Before use apply sealer, the ends of the exhaust manifolds should be clean and free from dirt, rust, grease, and oil. | |
2 | 2 | 102-8608 Exhaust Manifold | Before assembly, apply 2P-2333 High Temperature Sealer to the outer diameter of the male ends of the exhaust manifold. Remove excess sealer from the assembled joint. |
3 | 1 | 102-8501 Exhaust Manifold | Before assembly, apply 2P-2333 High Temperature Sealer to the inner diameter of the female ends of the exhaust manifold. Remove excess sealer from the assembled joint. |
4 | 12 | 2N-2766 Locknut | Before assembly, apply 4C-5599 Anti-Seize Compound to the threads. |
Refer to Illustration 2 in order to tighten the locknut 1 through locknut 12 to |
|||
Do not reuse. |
Caterpillar Information System:
3500 Engines Crankcase Breather
C175-16 Locomotive Engine Gear Group (Rear)
C15 and C18 Industrial Engines Electric Starting Motor
3500 Engines Engine Oil Cooler
C175-16 Petroleum Engines Turbocharger
C9.3 Tier 4 Final Engines Engine Oil Filter Base
C15 and C18 Engines for Caterpillar Built Machines Electric Starting Motor
2011/08/23 Introduction of Radiator Protection Screen on C4.4 and C4.4 (Mech) Engines {1353}
C15 and C18 Petroleum Engines Turbocharger
C15 and C18 Industrial Engines Electric Starting Motor
C175-16 Locomotive Engine Cylinder Liner
C13, C15, and C18 Generator Set Engines Turbocharger
G3406 Engine Before Starting Engine
XQ400 Power Module Starting the Engine
C9.3 Tier 4 Final Engines Water Lines
Network Management Card with Modbus for the UPSB505 Uninterruptible Power Supply Web Interface
CG137-08 and CG137-12 Engines Emergency Stopping
3500 Engines Crankcase Breather
C15 and C18 Industrial Engines Flywheel
C15 and C18 Industrial Engines Flywheel
C9.3 Tier 4 Final Engines Valve Mechanism Cover
C32 Marine and Auxiliary Marine Engines Electric Starting Motor
C13, C15, and C18 Tier 4 Final Engines Flywheel
C13, C15, and C18 Tier 4 Final Engines Camshaft