Camshaft
Show/hide table
图 1 | g02563276 |
Show/hide table
348-9715 凸轮轴 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
A     | -     | -     | 凸轮轴轴承轴颈的直径为 77.850 ± 0.025 mm (3.0650 ± 0.0010 in)。     |
1     | -     | -     | 零度时的最大排气凸轮升程为 9.41655 mm (0.37073 in)。     |
2     | -     | -     | 零度时的最大喷油器凸轮升程为 13.73267 mm (0.54066 in)。     |
3     | -     | -     | 零度时的最大进气凸轮升程为 12.60667 mm (0.49632 in)。     |
-     | -     | -     | 请使用以下步骤得出实际的凸轮升程 (B) : 1. 测量凸轮轴凸轮高度 (C) 。     |
-     | -     | -     | 2. 测量基圆 (D) 。     |
-     | -     | -     | 3. 从步骤 1 中得到的凸轮轴凸轮高度值中减去步骤 2 中得到的基圆测量值。 二者之差即为实际凸轮升程。     |
-     | -     | -     | 步骤 3 中的实际凸轮升程和新凸轮轴的规定凸轮轴凸轮升程间的最大允许差值为 ± 0.10 mm (± 0.0034 in)。     |
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Flywheel
C32 Marine and Auxiliary Marine Engines Electric Starting Motor
C9.3 Tier 4 Final Engines Valve Mechanism Cover
C15 and C18 Industrial Engines Flywheel
C15 and C18 Industrial Engines Flywheel
3500 Engines Crankcase Breather
CG137-08 and CG137-12 Engines Emergency Stopping
Network Management Card with Modbus for the UPSB505 Uninterruptible Power Supply Web Interface
C9.3 Tier 4 Final Engines Water Lines
XQ400 Power Module Starting the Engine
G3406 Engine Before Starting Engine
C15 Petroleum Generator Set Engines Exhaust Manifold
C15 Petroleum Engines Coolant Temperature Is High
C9.3 Tier 4 Final Engines Main Bearing Journal
C32 Marine and Auxiliary Marine Engines Alternator Mounting
C15 Petroleum Engines Engine Cranks but Does Not Start
C15 Petroleum Engines Engine Top Speed Is Not Obtained
C15 Petroleum Engines Exhaust Temperature Is High
Network Management Card with Modbus for the UPSB505 Uninterruptible Power Supply UPS Monitor and Configure
2011/05/16 Caterpillar Remanufactured Electric Starting Motors Are Improved {1453}
C9.3 Engine for Caterpillar Built Machines Crankshaft
3500C Locomotive Engines Refill Capacities
XQ400 Power Module Aftercooler Core - Inspect/Clean/Test
Cat Water Delivery System (WDS) Hydraulic System Oil Level - Check