Crankshaft
Show/hide table
图 1 | g02563856 |
(2) 连杆轴承轴颈 (3) 主轴承轴颈 |
Show/hide table
224-3881 曲轴总成 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
1     | 2     | 246-3144 止推片     | 止推片只可用于中央主轴承轴颈上。     |
A     | -     | -     | 曲轴齿轮和曲轴之间的间隙不应超过 0.10 mm (0.004 in)。     |
B     | -     | -     | 曲轴齿轮的平均直径为 136.20 ± 0.11 mm (5.362 ± 0.004 in)。 组装后曲轴齿轮的最大直径为 136.36 mm (5.368 in)。     |
D     | -     | -     | 定位销 (4) 顶部至曲轴表面的高度为 8.0 ± 0.5 mm (0.31 ± 0.02 in)。     |
-     | -     | -     | 在将曲轴装配到缸体中后,曲轴端隙最大应为 0.50 mm (0.020 in),最小应为 0.10 mm (0.004 in)。     |
Caterpillar Information System:
2011/05/16 Caterpillar Remanufactured Electric Starting Motors Are Improved {1453}
Network Management Card with Modbus for the UPSB505 Uninterruptible Power Supply UPS Monitor and Configure
C15 Petroleum Engines Exhaust Temperature Is High
C15 Petroleum Engines Engine Top Speed Is Not Obtained
C15 Petroleum Engines Engine Cranks but Does Not Start
C32 Marine and Auxiliary Marine Engines Alternator Mounting
C9.3 Tier 4 Final Engines Main Bearing Journal
C15 Petroleum Engines Coolant Temperature Is High
C13, C15, and C18 Tier 4 Final Engines Camshaft
C13, C15, and C18 Tier 4 Final Engines Flywheel
C32 Marine and Auxiliary Marine Engines Electric Starting Motor
C9.3 Tier 4 Final Engines Valve Mechanism Cover
3500C Locomotive Engines Refill Capacities
XQ400 Power Module Aftercooler Core - Inspect/Clean/Test
Cat Water Delivery System (WDS) Hydraulic System Oil Level - Check
Cat Water Delivery System (WDS) Hydraulic Tank Breather - Replace
3500 Engines Engine Oil Pan
C-15, C-16, and C-18 Truck Engines Flywheel Housing
C9.3 Tier 4 Final Engines Piston Cooling Jet
C27 and C32 Engines for Caterpillar Built Machines Valve Mechanism
C15 Petroleum Engines Flywheel Housing
3500 Engines Engine Oil Pan
C3.4B Industrial Engine Plate Locations and Film Locations - Engine
C13, C15, and C18 Tier 4 Final Engines Connecting Rod