C-15, C-16, and C-18 Truck Engines Caterpillar


Flywheel Housing

Usage:

C-15 6NZ


图 1g02565378


图 2g02565377
螺栓拧紧顺序

表 1
技术规格,用于 160-6265 飞轮壳体总成 
项目  数量  零件  技术规格说明 
在装配过程中,检查下列部件上有无任何异物:飞轮壳的前端面、飞轮壳垫片的两侧和缸体的后端面。 这些部件上必须没有以下物质:机油、燃油、水、垫片粘合剂、装配固定胶和任何其他异物。 
在安装油底壳密封垫和油底壳之前,涂抹少量超蓝 Loctite 587 来填充缸体、飞轮壳体和油底壳之间的缝隙。 
按照以下步骤拧紧飞轮壳螺栓: 
5J-5793 螺栓  1. 安装图 2 至 100 ± 20 N·m (74 ± 15 lb ft) 中所示数字顺序拧紧螺栓 (1) 至螺栓 (9)。
2. 按图 2 至 40 ± 10 N·m (30 ± 7 lb ft) 中所示数字顺序拧紧螺栓 (10) 至螺栓 (24)。
3. 按图 2 至 135 ± 20 N·m (100 ± 15 lb ft) 中所示数字顺序再次拧紧螺栓 (1) 至螺栓 (9)。
4. 按图 2 至 55 ± 10 N·m (41 ± 7 lb ft) 中所示数字顺序再次拧紧螺栓 (10) 至螺栓 (24)。 
165-3931 螺栓 
165-3929 螺栓 
165-3934 螺栓 
1P-1669 密封塞  拧紧至扭矩为 9.5 ± 1.5 N·m (84 ± 13 lb in)。 
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.