Flywheel Housing
Show/hide table
Illustration 1 | g02565458 |
Show/hide table
Illustration 2 | g02565457 |
Bolt tightening sequence |
Show/hide table
Specification for 199-2743 Flywheel Housing Gp | |||
Item | Qty | Part | Specification Description |
Before installation of the flywheel housing, inspect the front face of the flywheel housing and the rear face of the cylinder block. The components must be free of the following substances: oil, fuel, water, gasket adhesive, assembly compounds, and any other foreign material. | |||
To seal the joint between the flywheel housing and the cylinder block, apply ultra blue Loctite 587 to the mating surface of the flywheel housing. | |||
Use the following procedure to tighten the flywheel housing bolts: | |||
1 | 9 | 5J-5793 Bolt | 1. Tighten bolt (1) through bolt (9) in a numerical sequence as shown in Illustration 2 to 2. Tighten bolt (10) through (24) in a numerical sequence as shown in Illustration 2 to 3. Again tighten bolt (1) through bolt (9) in a numerical sequence as shown in Illustration 2 to 4. Again tighten bolt (10) through bolt (24) in a numerical sequence as shown in Illustration 2 to |
2 | 5 | 165-3931 Bolt | |
3 | 2 | 165-3934 Bolt | |
4 | 2 | 9L-9115 Stud | |
5 | 6 | 165-3929 Bolt | |
6 | 1 | 5F-0304 Plug | Tighten to |
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines Valve Mechanism
C9.3 Tier 4 Final Engines Piston Cooling Jet
C-15, C-16, and C-18 Truck Engines Flywheel Housing
3500 Engines Engine Oil Pan
Cat Water Delivery System (WDS) Hydraulic Tank Breather - Replace
Cat Water Delivery System (WDS) Hydraulic System Oil Level - Check
XQ400 Power Module Aftercooler Core - Inspect/Clean/Test
3500C Locomotive Engines Refill Capacities
C9.3 Engine for Caterpillar Built Machines Crankshaft
2011/05/16 Caterpillar Remanufactured Electric Starting Motors Are Improved {1453}
Network Management Card with Modbus for the UPSB505 Uninterruptible Power Supply UPS Monitor and Configure
C15 Petroleum Engines Exhaust Temperature Is High
3500 Engines Engine Oil Pan
C3.4B Industrial Engine Plate Locations and Film Locations - Engine
C13, C15, and C18 Tier 4 Final Engines Connecting Rod
XQ60 Rental Generator Set Product Lifting
C32 Marine and Auxiliary Marine Engines Alternator Mounting
C32 Marine and Auxiliary Marine Engines Alternator Mounting
C3.4B Industrial Engine Gauges and Indicators
3500B and 3500C Marine Engines Water Lines
330F MHPU Mobile Hydraulic Power Unit Machine System Rollover Protective Structure (ROPS) Mounting
C3.4B Industrial Engine Monitoring System
3508B Industrial Engines Water Lines
XQ400 Power Module Catalytic Converter Pressure - Test