Overview Page
The Overview page is displayed by default when you click the "UPS" tab or when you click "Overview" on the left navigation menu of that tab.
Operating State
Below the UPS model name, icons and accompanying text indicate the operating state of the UPS:
| Critical Icon - A critical alarm exists, which requires immediate action to avoid data loss or equipment damage. |
| Warning Icon - An alarm condition requires attention and could jeopardize your data or equipment if the alarms cause is not addressed. |
| Online Icon - No alarms are present. |
Note: In an alarm state, the accompanying text names the alarm condition and gives a brief description of the alarm.
Quick Status
The following information is displayed in a graphical format:
Load in Watts - A graph showing the load of the attached equipment as a percentage of available Watts.
Battery Capacity - A graph showing the percentage of the total UPS battery capacity available to support attached equipment.
The following information is displayed in a list format:
Input Voltage - The AC voltage (VAC) being received by each phase of the UPS.
Output Voltage - The AC voltage (VAC) each phase of the UPS is providing to the load.
Runtime Remaining - How long the UPS can use battery power to support the attached equipment.
Last Battery Transfer - The cause of the last switch to battery operation.
Recent UPS Events
The most recent UPS events that occurred are listed in reverse chronological order. To view the entire event log, click "More Events".
Status Page
To display detailed UPS status:
- Click the Status option on the left navigation menu of the UPS tab.
- Click an option under the Status heading.
Model-Specific Status Displayed
To view detailed information about status items specific to the UPS model associated with the Management Card, click the "Help" link in the upper right corner of the user interface.
The types of model-specific information displayed include the following values, some of which are reported by phase for 3-phase UPS models:
Internal Temperature - The temperature inside the UPS
Voltage, Current, and Frequency Information - Information such as input and output voltage, input and output current, input frequency, input voltage in bypass mode, and minimum and maximum input voltage during the last minute.
Ups Load Information - Information such as
- Information such as the load placed on the UPS in kVA or as a percentage of available kVA or Watts.
Fault Tolerance information - Information such as redundant power available.
Battery information - Information such as available battery capacity, percentage of full battery capacity, battery output current, rated voltage capacity of batteries, amp-hour rating of battery cabinets, number of batteries installed, and number of faulty batteries.
Status Of Internal And External Components - Information such as intelligence and power modules, circuit breaker box, external switch gear, and transformer.
The About Option
This option provides the following information about the UPS:
Model - The model name of the UPS.
Serial Number - The unique identification number of the UPS, also provided on the UPS.
Firmware Revision - The revision numbers of the firmware modules installed on the UPS
Product Name - The brand name of the UPS
Technical Level - The revision numbers of the firmware modules currently installed on the UPS
UPS Time - The current time at the location of the UPS.
Country - The country where the UPS is located.
Manufacturer Name - The manufacturer of the UPS
UPS Time - The local time at the location of the UPS