C9.3 Tier 4 Final Engines Caterpillar


Piston Cooling Jet

Usage:

D6T 2B3


Illustration 1g02565417

Table 1
Specification for 276-7222 Oil Jet Tube As 
Item  Qty  Part  Specification Description 
Use the following dimensions in order to locate point (1) and point (2).
Dimension is 47.11 ± 0.50 mm (1.854 ± 0.020 inch)
Dimension is 55.30 ± 0.25 mm (2.177 ± 0.010 inch)
Dimension is 3.84 ± 0.25 mm (0.151 ± 0.010 inch)
Dimension is 250.00 ± 0.25 mm (9.843 ± 0.010 inch)
Do not damage the inside surface of the piston jet orifices with the drill rod. Damage to the inside surface can cause the stream of oil to be altered. 
The piston cooling jets (5) must be checked for the location of the stream of oil. Insert a straight drill rod with a diameter that fits snugly in each piston jet orifice. The inside diameter of piston jet orifice (3) is 2.40 mm (0.094 inch). The inside diameter of piston jet orifice (4) is 1.5 mm (0.06 inch). This drill rod simulates the stream of oil under normal operating pressure. Place the drill rod in orifice (4). The drill rod must pass through a circle with a diameter of 15.0 mm (0.60 inch) at location (2D). Place the drill rod in orifice (3). The drill rod must pass through a circle with a diameter of 9.0 mm (0.35 inch) at location (1D). 
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.