349F and 352F Excavators Machine System Specifications Caterpillar


Control Valve

Usage:

349F L BZ2


Illustration 1g02646941

Table 1
Specification for 310-0340 Control Valve Gp  
Item  Qty  Part  Specification Description 
122-7673 Special Bolt  Torque to 70 ± 10 N·m (52 ± 7 lb ft)
310-0277 Spring  Length under test force is 75.00 mm (2.953 inch)
Test force is 166.8 N (37.5 lb).
Free length after test is 76.40 mm (3.008 inch).

Caterpillar Information System:

C32 Generator Set Overhaul Considerations
2011/01/10 A New Valve Bridge Is Available for Certain Truck Engines {1102, 1123}
349F and 352F Excavators Machine System Specifications Control Valve (Auxiliary)
2011/01/10 A New Valve Bridge Is Available for Certain Commercial Engines {1102, 1123}
349F and 352F Excavators Machine System Specifications Stick Cylinder Lines
Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950} Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950}
349F and 352F Excavators Machine System Specifications Boom Cylinder Lines
349F and 352F Excavators Machine System Specifications Pump Lines (Main)
349F and 352F Excavators Machine System Specifications Check Valve (Return Lines)
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300} Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
3406E and C15 Marine Engines Fuel Injector - Check
C7 Engines for Combat and Tactical Vehicles Severe Service Application
3116 and 3126 Marine Engines Auxiliary Water Pump (Rubber Impeller) - Inspect
3516C Locomotive Engines Camshaft - Remove
3516C Locomotive Engines Camshaft - Install
349F and 352F Excavators Machine System Specifications Control Valve
349F and 352F Excavators Machine System Specifications Swing Motor Lines
349F and 352F Excavators Machine System Specifications Recoil Spring
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169} Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Installation of Improved Battery Charger for Certain C9, C15, and C18 Gensets{1401, 1406} Installation of Improved Battery Charger for Certain C9, C15, and C18 Gensets{1401, 1406}
C4.4 Industrial Engine Product Lifting - Clean Emission Module
3500 Engines Crankshaft - Remove
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Startup
C32 Marine Generator Set Product Description
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.