349F and 352F Excavators Machine System Specifications Caterpillar


Control Valve (Auxiliary)

Usage:

352F-VG A9J


Illustration 1g02382836

Table 1
Item  Qty  Part  Specification Description 
568-3724 Relief Valve Gp  Torque to 116 ± 8 N·m (86 ± 6 lb ft)
8T-4186 Bolt  Torque to 49 ± 5 N·m (36 ± 4 lb ft)


Illustration 2g02639116
Detail view of area D

Table 2
Item  Qty  Part  Specification Description 
095-1791 Backup Ring  Lubricate lightly with the lubricant that is being sealed. 
095-1597 O-Ring Seal  Lubricate lightly with the lubricant that is being sealed. 
310-0285 Check Valve Plug  Torque to 290 to 315 N·m (214 to 232 lb ft)
310-0287 Check Valve Spring  Length under test force is 55.50 mm (2.185 inch)
Test force is 12.0 ± 0.6 N (2.7 ± 0.1 lb).
Free length after test is 71.20 mm (2.803 inch).

Caterpillar Information System:

2011/01/10 A New Valve Bridge Is Available for Certain Commercial Engines {1102, 1123}
349F and 352F Excavators Machine System Specifications Stick Cylinder Lines
Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950} Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950}
349F and 352F Excavators Machine System Specifications Boom Cylinder Lines
349F and 352F Excavators Machine System Specifications Pump Lines (Main)
349F and 352F Excavators Machine System Specifications Check Valve (Return Lines)
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300} Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
3406E and C15 Marine Engines Fuel Injector - Check
C7 Engines for Combat and Tactical Vehicles Severe Service Application
349F and 352F Excavators Hydraulic System Relief Valve (Counterweight Cylinder) - Test and Adjust
C7 Engines for Combat and Tactical Vehicles Grounding Stud - Inspect/Clean/Tighten
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Machine Monitoring System Configuration
2011/01/10 A New Valve Bridge Is Available for Certain Truck Engines {1102, 1123}
C32 Generator Set Overhaul Considerations
349F and 352F Excavators Machine System Specifications Control Valve
3116 and 3126 Marine Engines Auxiliary Water Pump (Rubber Impeller) - Inspect
3516C Locomotive Engines Camshaft - Remove
3516C Locomotive Engines Camshaft - Install
349F and 352F Excavators Machine System Specifications Control Valve
349F and 352F Excavators Machine System Specifications Swing Motor Lines
349F and 352F Excavators Machine System Specifications Recoil Spring
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169} Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Installation of Improved Battery Charger for Certain C9, C15, and C18 Gensets{1401, 1406} Installation of Improved Battery Charger for Certain C9, C15, and C18 Gensets{1401, 1406}
C4.4 Industrial Engine Product Lifting - Clean Emission Module
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.