C4.4 Industrial Engine Caterpillar


Product Lifting - Clean Emission Module

Usage:

C4.4 448



图 1g02385036

确保穿戴合适的工作服,请参考本操作和保养手册, "一般危险信息"。

负载时,清洁排放模块(CEM)的重量约为 50 kg (110 lb)。 需要使用两个合适的双圈吊索以便提升 CEM。 还需要使用一个合适的举倾机构以便拆下并安装组件。

吊索必须接合在 CEM 的如图 1 所示位置。

确保吊索仅与 CEM 的本体接触。 需要进行测试提升,以便实现组件的正确平衡。

某些应用可能需要使用机架或夹具以便提升 CEM。 机架或夹具必须仅连接到 CEM 的吊架上。 请参阅 OEM 以了解更多信息。

Caterpillar Information System:

Installation of Improved Battery Charger for Certain C9, C15, and C18 Gensets{1401, 1406} Installation of Improved Battery Charger for Certain C9, C15, and C18 Gensets{1401, 1406}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169} Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
349F and 352F Excavators Machine System Specifications Recoil Spring
349F and 352F Excavators Machine System Specifications Swing Motor Lines
349F and 352F Excavators Machine System Specifications Control Valve
3516C Locomotive Engines Camshaft - Install
3516C Locomotive Engines Camshaft - Remove
3116 and 3126 Marine Engines Auxiliary Water Pump (Rubber Impeller) - Inspect
349F and 352F Excavators Machine System Specifications Control Valve
C32 Generator Set Overhaul Considerations
2011/01/10 A New Valve Bridge Is Available for Certain Truck Engines {1102, 1123}
349F and 352F Excavators Machine System Specifications Control Valve (Auxiliary)
3500 Engines Crankshaft - Remove
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Startup
C32 Marine Generator Set Product Description
3500 Engines Crankshaft - Install
UPSB220 Uninterruptible Power Supply Emergency Power Off Connection
3512E Tier 4 Final Engines for Land Electric Drilling Engine Design
Facility and Equipment Layouts {4150} Facility and Equipment Layouts {4150}
Procedure for Installation of VR6 Voltage Regulator{4467} Procedure for Installation of VR6 Voltage Regulator{4467}
C32 Generator Set Generator Operation
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057} Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
G3406 and G3412 Generator Sets Generator Bearing Temperature - Test/Record
3500 Generator Sets Rotating Rectifier - Check
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.