349F and 352F Excavators Machine System Specifications Caterpillar


Recoil Spring

Usage:

352F-VG A9J


Illustration 1g02639577

Table 1
Specification for 297-9235 Recoil Spring Gp  
Item  Qty  Part  Specification Description 
297-9245 Spring  Length under test force is 823 mm (32.4 inch)
Test force is 307969 ± 24000 N (69234 ± 5395 lb).
Free length after test is 994.1 mm (39.14 inch).
8T-9080 Bolt  Apply blue Loctite 242 to the threads. 
Before assembly, the mounting surfaces for idler group must be clean and free of paint, protective coating, and oil. 

Caterpillar Information System:

349F and 352F Excavators Machine System Specifications Swing Motor Lines
349F and 352F Excavators Machine System Specifications Control Valve
3516C Locomotive Engines Camshaft - Install
3516C Locomotive Engines Camshaft - Remove
3116 and 3126 Marine Engines Auxiliary Water Pump (Rubber Impeller) - Inspect
349F and 352F Excavators Machine System Specifications Control Valve
C32 Generator Set Overhaul Considerations
2011/01/10 A New Valve Bridge Is Available for Certain Truck Engines {1102, 1123}
349F and 352F Excavators Machine System Specifications Control Valve (Auxiliary)
2011/01/10 A New Valve Bridge Is Available for Certain Commercial Engines {1102, 1123}
349F and 352F Excavators Machine System Specifications Stick Cylinder Lines
Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950} Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169} Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Installation of Improved Battery Charger for Certain C9, C15, and C18 Gensets{1401, 1406} Installation of Improved Battery Charger for Certain C9, C15, and C18 Gensets{1401, 1406}
C4.4 Industrial Engine Product Lifting - Clean Emission Module
3500 Engines Crankshaft - Remove
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Startup
C32 Marine Generator Set Product Description
3500 Engines Crankshaft - Install
UPSB220 Uninterruptible Power Supply Emergency Power Off Connection
3512E Tier 4 Final Engines for Land Electric Drilling Engine Design
Facility and Equipment Layouts {4150} Facility and Equipment Layouts {4150}
Procedure for Installation of VR6 Voltage Regulator{4467} Procedure for Installation of VR6 Voltage Regulator{4467}
C32 Generator Set Generator Operation
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.