Stick Cylinder Lines
Show/hide table
Illustration 1 | g06373404 |
Show/hide table
Item | Qty | Part | Specification Description |
1 | 1 | 536-9070 Tube As | Torque to |
D1 | - | - | Distance from the centerline of the mounting pin to the support assembly (2) is |
3 | 8 | 457-5821 Bolt | Torque to |
4 | 2 | 8T-4186 Bolt | Torque to |
D2 | - | - | Orientation of the support assemblies is 30 ± 3 degrees. |
Caterpillar Information System:
Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950} Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950}
349F and 352F Excavators Machine System Specifications Boom Cylinder Lines
349F and 352F Excavators Machine System Specifications Pump Lines (Main)
349F and 352F Excavators Machine System Specifications Check Valve (Return Lines)
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300} Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
3406E and C15 Marine Engines Fuel Injector - Check
C7 Engines for Combat and Tactical Vehicles Severe Service Application
349F and 352F Excavators Hydraulic System Relief Valve (Counterweight Cylinder) - Test and Adjust
C7 Engines for Combat and Tactical Vehicles Grounding Stud - Inspect/Clean/Tighten
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Machine Monitoring System Configuration
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Grade Control Configuration
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300} Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
2011/01/10 A New Valve Bridge Is Available for Certain Commercial Engines {1102, 1123}
349F and 352F Excavators Machine System Specifications Control Valve (Auxiliary)
2011/01/10 A New Valve Bridge Is Available for Certain Truck Engines {1102, 1123}
C32 Generator Set Overhaul Considerations
349F and 352F Excavators Machine System Specifications Control Valve
3116 and 3126 Marine Engines Auxiliary Water Pump (Rubber Impeller) - Inspect
3516C Locomotive Engines Camshaft - Remove
3516C Locomotive Engines Camshaft - Install
349F and 352F Excavators Machine System Specifications Control Valve
349F and 352F Excavators Machine System Specifications Swing Motor Lines
349F and 352F Excavators Machine System Specifications Recoil Spring
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169} Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}