349F and 352F Excavators Machine System Specifications Caterpillar


Check Valve (Return Lines)

Usage:

352F-VG A9J


Illustration 1g02382436

Table 1
Specification for 323-7671 Check Valve Gp 
Item  Qty  Part  Specification Description 
Use hard washer when check valve group is installed. 
Torque mounting bolts to 80 ± 8 N·m (59 ± 6 lb ft).
Torque plug to 7 ± 1 N·m (62 ± 9 lb in)
Torque bolts to 15 ± 2 N·m (133 ± 18 lb in)

Caterpillar Information System:

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300} Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
3406E and C15 Marine Engines Fuel Injector - Check
C7 Engines for Combat and Tactical Vehicles Severe Service Application
349F and 352F Excavators Hydraulic System Relief Valve (Counterweight Cylinder) - Test and Adjust
C7 Engines for Combat and Tactical Vehicles Grounding Stud - Inspect/Clean/Tighten
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Machine Monitoring System Configuration
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Grade Control Configuration
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300} Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
2011/01/10 A New Waste Gate for the Turbocharger Is Now Being Used on the Certain C13 Industrial Engines {1052, 1053, 1057, 1940}
3500 Engines Engine Oil Sequence Valves - Remove and Install
349F and 352F Excavators Machine System Specifications Accumulator (Pilot)
349F and 352F Excavators Machine System Specifications Relief Valve (Main)
349F and 352F Excavators Machine System Specifications Pump Lines (Main)
349F and 352F Excavators Machine System Specifications Boom Cylinder Lines
Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950} Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950}
349F and 352F Excavators Machine System Specifications Stick Cylinder Lines
2011/01/10 A New Valve Bridge Is Available for Certain Commercial Engines {1102, 1123}
349F and 352F Excavators Machine System Specifications Control Valve (Auxiliary)
2011/01/10 A New Valve Bridge Is Available for Certain Truck Engines {1102, 1123}
C32 Generator Set Overhaul Considerations
349F and 352F Excavators Machine System Specifications Control Valve
3116 and 3126 Marine Engines Auxiliary Water Pump (Rubber Impeller) - Inspect
3516C Locomotive Engines Camshaft - Remove
3516C Locomotive Engines Camshaft - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.