Valve Mechanism Cover
Show/hide table
| |
| Illustration 1 | g02663578 |
Show/hide table
| Specification for 349-1527 Valve Mechanism Cover Gp | |||
| Item | Qty | Part | Specification Description |
| A | 1 | - | Orientation for the breather cap is 11° ± 5°. |
| 1 | 1 | 227-4531 Engine Oil Filler Cap As | Hand tighten the engine oil filter cap assembly until the O-ring seal seats fully on the valve mechanism cover. |
| Tighten the bolt 1 through bolt 10 in a numerical sequence that is shown in Illustration 1 to standard torque. | |||
Show/hide table
| |
| Illustration 2 | g02663579 |
Show/hide table
| Specification for 349-1527 Valve Mechanism Cover Gp | |||
| Item | Qty | Part | Specification Description |
| 2 | 1 | 2N-8109 Clamp | Torque to |
| 3 | 1 | 365-5169 Adapter | Torque to |
| 4 | 1 | 6V-3831 O-Ring Seal | Lightly lubricate the bore of the O-ring seal with clean engine oil. |
Caterpillar Information System:
2010/12/23 The Air Lines Group between the Turbocharger Compressors and the Aftercoolers Is Improved on G3500C and G3500E Generator Set Engines {1052, 1063, 1071}
C3.4B Engines Engine Vibration Is Excessive
C6.6 Industrial Engine Temperature Sensor (NOx Reduction System)
C6.6 Industrial Engine Pressure Sensor (NOx Reduction System)
C6.6 Industrial Engine Fuel Filter Base - Twin Secondary Fuel Filter Base
C27 and C32 Industrial Engines Cylinder Head - Remove
C15 and C18 Engines Severe Service Application
2011/03/02 A New Filter Connector is Added to the Pilot Hydraulic System on Certain Excavators {5264}
G3304B and G3306B Engines Air/Fuel Ratio Control - Adjust
C9.3 Tier 4 Final Engines Temperature Sensor (NOx Reduction System)
C18 Generator Set Engines Secondary ECM Assumes Control
C9.3 Tier 4 Final Engines Pressure Sensor (NOx Reduction System)
C3.4B Engines Exhaust Has Excessive White Smoke
C4.4 Industrial Engine Fuel System - Prime
C13, C15, and C18 Tier 4 Interim Engines ARD Combustion Air - Test
C3.4B Engines Fuel Contains Water
C9.3 Industrial Engine Valve Mechanism Cover
140 Motor Grader Engine Air Filter Secondary Element - Replace
2010/10/08 Using the Detonation Detection System to Troubleshoot Mechanical Problems in G3600 Engines {1223, 1559}
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Control (Pedal) - Calibrate
C27 and C32 Industrial Engines Cylinder Head - Install
C27 and C32 Industrial Engines Inlet Manifold - Remove and Install
C3.4B Engines Oil Consumption Is Excessive
C3.4B Engines Oil Contains Coolant