Pressure Sensor (NOx Reduction System)
Note: For the correct procedure to install the manifold and tube assemblies from the NOx Reduction System (NRS) manifold, refer to Disassembly and Assembly, "Pressure Sensor (Cooled Exhaust Gas) - Remove and Install".
Show/hide table
Illustration 1 | g02290113 |
Typical example |
(1) Tighten the bolts to the following torque. ...
(2) Tighten the pressure sensor to the following torque. ...
Caterpillar Information System:
C6.6 Industrial Engine Fuel Filter Base - Twin Secondary Fuel Filter Base
C27 and C32 Industrial Engines Cylinder Head - Remove
C15 and C18 Engines Severe Service Application
2011/03/02 A New Filter Connector is Added to the Pilot Hydraulic System on Certain Excavators {5264}
G3304B and G3306B Engines Air/Fuel Ratio Control - Adjust
C9.3 Tier 4 Final Engines Temperature Sensor (NOx Reduction System)
C18 Generator Set Engines Secondary ECM Assumes Control
C9.3 Tier 4 Final Engines Pressure Sensor (NOx Reduction System)
C6.6 Industrial Engine Exhaust Cooler (NRS) - Test
C3.4B Engines Engine Shutdown Occurs Intermittently
C3.4B Engines Engine Has Mechanical Noise (Knock)
C3.4B Engines Engine Does Not Crank
C6.6 Industrial Engine Temperature Sensor (NOx Reduction System)
C3.4B Engines Engine Vibration Is Excessive
2010/12/23 The Air Lines Group between the Turbocharger Compressors and the Aftercoolers Is Improved on G3500C and G3500E Generator Set Engines {1052, 1063, 1071}
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism Cover
C3.4B Engines Exhaust Has Excessive White Smoke
C4.4 Industrial Engine Fuel System - Prime
C13, C15, and C18 Tier 4 Interim Engines ARD Combustion Air - Test
C3.4B Engines Fuel Contains Water
C9.3 Industrial Engine Valve Mechanism Cover
140 Motor Grader Engine Air Filter Secondary Element - Replace
2010/10/08 Using the Detonation Detection System to Troubleshoot Mechanical Problems in G3600 Engines {1223, 1559}
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Control (Pedal) - Calibrate