System Pressure Release
Show/hide table
 |
|
Pressurized system: Hot coolant can cause serious burn. To open cap, stop engine, wait until radiator is cool. Then loosen cap slowly to relieve the pressure. |
Ensure that the power supply is isolated before any service or repair is performed.
To relieve the pressure from the coolant system, turn off the engine. Allow the cooling system pressure cap to cool. Remove the cooling system pressure cap slowly in order to relieve pressure.
To relieve the pressure from the fuel system, turn off the engine.
To relieve pressure from the lubricating system, turn off the engine.
Caterpillar Information System:
C1.5 and C2.2 Industrial Engines Welding on Engines with Electronic Controls
2010/09/27 New Parts Are Used for the Number One Planetary Carrier on CX31 On-Highway Transmissions {3160}
320E and 323E Excavators Hydraulic System Swing Drive
C1.5 and C2.2 Industrial Engines Engine Operation
C1.5 and C2.2 Industrial Engines Starting the Engine
C1.5 and C2.2 Industrial Engines Before Starting Engine
C1.5 and C2.2 Industrial Engines Configuration Parameters
C1.5 and C2.2 Industrial Engines Engine Operation with Intermittent Diagnostic Codes
C1.5 and C2.2 Industrial Engines Engine Operation with Active Diagnostic Codes
C1.5 and C2.2 Industrial Engines Fault Logging
C1.5 and C2.2 Industrial Engines Diagnostic Lamp
G3406 and G3412 Generator Sets Varistor - Inspect
320E and 323E Excavators Fuel Tank Shutoff and Drain Control
3500 and 3500B Engines Safety Messages
2010/10/13 Improved Software Is Used for C280 Marine Propulsion Engines {1901, 1920}
Repair of Web Cracks In Final Drive Planetary Carriers {4092} Repair of Web Cracks In Final Drive Planetary Carriers {4092}
C6.6 Industrial Engine Pressure Sensor (DPF) - Remove and Install - Clean Emissions Module
Procedure for Ordering Vintage Parts {0374, 1000, 7000} Procedure for Ordering Vintage Parts {0374, 1000, 7000}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561} 226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
C13 Industrial Engine Safety Messages
C15 and C18 Engines for Caterpillar Built Machines Turbocharger
C9.3 Tier 4 Final Engines Cleanliness of Fuel System Components
C13 Industrial Engine Model View Illustrations
C15 and C18 Engines Plate Locations and Film Locations