Turbocharger
Show/hide table
 | |
| 图 1 | g02981576 |
右视图 | |
Show/hide table
| 345-9009 涡轮增压器总成 的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 4 | 375-2467 法兰锁紧螺母 | 在装配前，使用 Loctite C5A 铜防咬合剂润滑螺纹和轴承表面。 拧紧至扭矩为 70 ± 5 N·m (52 ± 4 lb ft)。 |
| 2 | 1 | 239-5858 压缩机卡箍组件 | 将压缩机卡箍组件拧紧至扭矩为 13.6 ± 1.2 N·m (120.4 ± 10.6 lb in)。 |
| 3 | 1 | 9N-2038 涡轮卡箍组件 | 使用以下步骤拧紧涡轮卡箍组件： 1. 拧紧至扭矩为 18.0 ± 1.6 N·m (159.3 ± 14.2 lb in)。 2. 松开 1 到 2 圈。 3. 再次拧紧至扭矩为 13.6 ± 1.2 N·m (120.4 ± 10.6 lb in)。 |
Caterpillar Information System:
C13 Industrial Engine Safety Messages
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561} 226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
Procedure for Ordering Vintage Parts {0374, 1000, 7000} Procedure for Ordering Vintage Parts {0374, 1000, 7000}
C6.6 Industrial Engine Pressure Sensor (DPF) - Remove and Install - Clean Emissions Module
Repair of Web Cracks In Final Drive Planetary Carriers {4092} Repair of Web Cracks In Final Drive Planetary Carriers {4092}
2010/10/13 Improved Software Is Used for C280 Marine Propulsion Engines {1901, 1920}
3500 and 3500B Engines Safety Messages
320E and 323E Excavators Fuel Tank Shutoff and Drain Control
C1.5 and C2.2 Industrial Engines System Pressure Release
C1.5 and C2.2 Industrial Engines Welding on Engines with Electronic Controls
2010/09/27 New Parts Are Used for the Number One Planetary Carrier on CX31 On-Highway Transmissions {3160}
320E and 323E Excavators Hydraulic System Swing Drive
C9.3 Tier 4 Final Engines Cleanliness of Fuel System Components
C13 Industrial Engine Model View Illustrations
C15 and C18 Engines Plate Locations and Film Locations
C1.5 and C2.2 Industrial Engines Fuel System Secondary Filter - Replace
2010/11/05 Repair Procedure for Installing the Wastegate Cover Kit for Certain On-Highway Truck Engines {1052, 1053}
C1.5 and C2.2 Industrial Engines Fan Clearance - Check
C13 Industrial Engine Product Description
826K Landfill Compactor Severe Service Application
A Quality Problem Is Identified on Friction Disc on Certain Caterpillar Products{3160} A Quality Problem Is Identified on Friction Disc on Certain Caterpillar Products{3160}
C6.6 Industrial Engine Flow Control Valve - Remove and Install
2010/12/13 A New Bolt Is Now Used to Secure the Rocker Arm Shaft on Certain C27 and C32 Engines {1102, 1123, 1292, 7553}
C6.6 Industrial Engine Water Separator and Fuel Filter (Primary) - Remove and Install