Fan Clearance - Check
Show/hide table
图 1 | g03309719 |
典型示例 |
确保发动机停转。 确保蓄电池断路开关处于断开位置。 确保冷却系统注满。
风扇罩 (2) 和风扇 (1) 之间的间隙需要检查。 必须在四个间距相等的位置对风扇罩边缘和风扇叶片 (A) 末端之间的间距进行检查。
- (A) 等于
5 mm (0.19685 inch) (三缸发动机或四缸自然吸气式发动机) - (A) 等于
10 mm (0.39370 inch) (涡轮增压式发动机)
注: 风扇罩不可调整。
Caterpillar Information System:
2010/11/05 Repair Procedure for Installing the Wastegate Cover Kit for Certain On-Highway Truck Engines {1052, 1053}
C1.5 and C2.2 Industrial Engines Fuel System Secondary Filter - Replace
C15 and C18 Engines Plate Locations and Film Locations
C13 Industrial Engine Model View Illustrations
C9.3 Tier 4 Final Engines Cleanliness of Fuel System Components
C15 and C18 Engines for Caterpillar Built Machines Turbocharger
C13 Industrial Engine Safety Messages
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561} 226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
Procedure for Ordering Vintage Parts {0374, 1000, 7000} Procedure for Ordering Vintage Parts {0374, 1000, 7000}
C6.6 Industrial Engine Pressure Sensor (DPF) - Remove and Install - Clean Emissions Module
Repair of Web Cracks In Final Drive Planetary Carriers {4092} Repair of Web Cracks In Final Drive Planetary Carriers {4092}
2010/10/13 Improved Software Is Used for C280 Marine Propulsion Engines {1901, 1920}
C13 Industrial Engine Product Description
826K Landfill Compactor Severe Service Application
A Quality Problem Is Identified on Friction Disc on Certain Caterpillar Products{3160} A Quality Problem Is Identified on Friction Disc on Certain Caterpillar Products{3160}
C6.6 Industrial Engine Flow Control Valve - Remove and Install
2010/12/13 A New Bolt Is Now Used to Secure the Rocker Arm Shaft on Certain C27 and C32 Engines {1102, 1123, 1292, 7553}
C6.6 Industrial Engine Water Separator and Fuel Filter (Primary) - Remove and Install
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Medium Pressure: Default Value of Work Tool Parameters
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Attachment Valves
C27 and C32 Engines for Caterpillar Built Machines ECM Does Not Communicate with Other Modules
C27 and C32 Engines for Caterpillar Built Machines Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C7.1 Industrial Engine Relief Valve (Fuel) - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - NRS Intake