Medium Pressure: Default Value of Work Tool Parameters
Note: For this system, parameters that are not shown in the tables, do not affect operation of the work tool.
Note: The parameters in the "DARK GRAY" cells do not affect the operation of the work tool.
Table 1 shows a quick reference to the approved Caterpillar work tools that are used.
Table 2 shows parameters for "TOOL#1" through "TOOL#5".
Table 3 shows parameters for "TOOL#6" through "TOOL#10".
Show/hide table
Medium Pressure | ||||
Work Tool | Tool Name | Flow Control | Pump Control | TOOL#s |
Other | - | - | Auxiliary Pump | #1 - #10 |
Refer to Testing and Adjusting, "Work Tool Parameter - Program" for the Tool Control System to find details of each of the parameters listed.
Show/hide table
Parameter Description | #1 | #2 | #3 | #4 | #5 |
General Parameters | |||||
Tool Program Tool Type | OTHER | OTHER | OTHER | OTHER | OTHER |
Tool Program Name | 0 | 0 | 0 | 0 | 0 |
Tool Program Maximum Throttle Dial Position | 10 | 10 | 10 | 10 | 10 |
Tool Program Minimum Throttle Dial Position | 1 | 1 | 1 | 1 | 1 |
Economy Mode Enable Status | Enabled | Enabled | Enabled | Enabled | Enabled |
Tool Program Pump Flow Control Mode | Pump #1 | Pump #1 | Pump #1 | Pump #1 | Pump #1 |
Tool Program Medium Pressure Circuit Main Pump Power Reduction (Initial) | 0.0% | 0.0% | 0.0% | 0.0% | 0.0% |
Tool Program Medium Pressure Circuit Main Pump Power Reduction (Total) | 30.0% | 30.0% | 30.0% | 30.0% | 30.0% |
Tool Program Variable Relief Valve #1 Pressure | |
|
|
|
|
Tool Program Variable Relief Valve #2 Pressure | |
|
|
|
|
F2 Type Valve Maximum Flow Derate Pressure | |
|
|
|
|
F2 Type Valve Flow Derate Start Pressure | |
|
|
|
|
F2 Type Valve Flow Derate End Pressure | |
|
|
|
|
Enhanced Multiple Operation Attachment Valve Limit Enable Status | Disabled | Disabled | Disabled | Disabled | Disabled |
Single Pump Mode Maximum Extend Pilot Pressure for Attachment Valve | |
|
|
|
|
Single Pump Mode Maximum Retract Pilot Pressure for Attachment Valve | |
|
|
|
|
Boom Operation Maximum Extend Pilot Pressure for Attachment Valve | |
|
|
|
|
Boom Operation Maximum Retract Pilot Pressure for Attachment Valve | |
|
|
|
|
Stick Operation Maximum Extend Pilot Pressure for Attachment Valve | |
|
|
|
|
Stick Operation Maximum Retract Pilot Pressure for Attachment Valve | |
|
|
|
|
Hammer Automatic Control Feature Enable Status | Disabled | Disabled | Disabled | Disabled | Disabled |
Hammer Automatic Control Feature Activation Pressure | |
|
|
|
|
Hammer Automatic Control Feature Deactivation Pressure | |
|
|
|
|
Bypass Cutoff Valve #1 Activation Boom Cylinder Extend Pilot Pressure | |
|
|
|
|
Bypass Cutoff Valve #1 Activation Stick Cylinder Retract Pilot Pressure | |
|
|
|
|
Bypass Cutoff Valve #2 Activation Boom Cylinder Extend Pilot Pressure | |
|
|
|
|
Bypass Cutoff Valve #2 Activation Stick Cylinder Retract Pilot Pressure | |
|
|
|
|
Boom Cylinder Retract Speed Limit Start Pilot Pressure | |
|
|
|
|
Boom Cylinder Retract Speed Limit Maximum Pilot Pressure | |
|
|
|
|
Stick Cylinder Retract Speed Limit Start Pilot Pressure | |
|
|
|
|
Stick Cylinder Retract Speed Limit Maximum Pilot Pressure | |
|
|
|
|
Stick Cylinder Extend Speed Limit Start Pilot Pressure | |
|
|
|
|
Stick Cylinder Extend Speed Limit Maximum Pilot Pressure | |
|
|
|
|
Boom Down Regeneration Valve Maximum Pilot Pressure | |
|
|
|
|
Tool Program Hydraulic Temperature High Warning Event Threshold | |
|
|
|
|
Attachment Valve #3 Parameters | |||||
Tool Program Attachment Valve #3 Flow Setting | |
|
|
|
|
Tool Program Attachment Valve #3 Multi- Operation Additional Flow | |
|
|
|
|
Tool Program Attachment Valve #3 One Way/ Two Way Valve Mode | Two-Way | Two-Way | Two-Way | Two-Way | Two-Way |
Tool Program Attachment Valve #3 Maximum Extend Pressure | |
|
|
|
|
Tool Program Attachment Valve #3 Maximum Retract Pressure | |
|
|
|
|
Multiple Operation Maximum Extend Pilot Pressure for Attachment Valve #3 | |
|
|
|
|
Multiple Operation Maximum Retract Pilot Pressure for Attachment Valve #3 | |
|
|
|
|
Tool Program Attachment Valve #3 Open Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #3 Close Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #3 Tool Flow Direction | Normal | Normal | Normal | Normal | Normal |
Show/hide table
Parameter Description | #6 | #7 | #8 | #9 | #10 |
General Parameters | |||||
Tool Program Tool Type | OTHER | OTHER | OTHER | OTHER | OTHER |
Tool Program Name | 0 | 0 | 0 | 0 | 0 |
Tool Program Maximum Throttle Dial Position | 10 | 10 | 10 | 10 | 10 |
Tool Program Minimum Throttle Dial Position | 1 | 1 | 1 | 1 | 1 |
Economy Mode Enable Status | Enabled | Enabled | Enabled | Enabled | Enabled |
Tool Program Pump Flow Control Mode | Pump #1 | Pump #1 | Pump #1 | Pump #1 | Pump #1 |
Tool Program Medium Pressure Circuit Main Pump Power Reduction (Initial) | 0.0% | 0.0% | 0.0% | 0.0% | 0.0% |
Tool Program Medium Pressure Circuit Main Pump Power Reduction (Total) | 30.0% | 30.0% | 30.0% | 30.0% | 30.0% |
Tool Program Variable Relief Valve #1 Pressure | |
|
|
|
|
Tool Program Variable Relief Valve #2 Pressure | |
|
|
|
|
F2 Type Valve Maximum Flow Derate Pressure | |
|
|
|
|
F2 Type Valve Flow Derate Start Pressure | |
|
|
|
|
F2 Type Valve Flow Derate End Pressure | |
|
|
|
|
Enhanced Multiple Operation Attachment Valve Limit Enable Status | Disabled | Disabled | Disabled | Disabled | Disabled |
Single Pump Mode Maximum Extend Pilot Pressure for Attachment Valve | |
|
|
|
|
Single Pump Mode Maximum Retract Pilot Pressure for Attachment Valve | |
|
|
|
|
Boom Operation Maximum Extend Pilot Pressure for Attachment Valve | |
|
|
|
|
Boom Operation Maximum Retract Pilot Pressure for Attachment Valve | |
|
|
|
|
Stick Operation Maximum Extend Pilot Pressure for Attachment Valve | |
|
|
|
|
Stick Operation Maximum Retract Pilot Pressure for Attachment Valve | |
|
|
|
|
Hammer Automatic Control Feature Enable Status | Disabled | Disabled | Disabled | Disabled | Disabled |
Hammer Automatic Control Feature Activation Pressure | |
|
|
|
|
Hammer Automatic Control Feature Deactivation Pressure | |
|
|
|
|
Bypass Cutoff Valve #1 Activation Boom Cylinder Extend Pilot Pressure | |
|
|
|
|
Bypass Cutoff Valve #1 Activation Stick Cylinder Retract Pilot Pressure | |
|
|
|
|
Bypass Cutoff Valve #2 Activation Boom Cylinder Extend Pilot Pressure | |
|
|
|
|
Bypass Cutoff Valve #2 Activation Stick Cylinder Retract Pilot Pressure | |
|
|
|
|
Boom Cylinder Retract Speed Limit Start Pilot Pressure | |
|
|
|
|
Boom Cylinder Retract Speed Limit Maximum Pilot Pressure | |
|
|
|
|
Stick Cylinder Retract Speed Limit Start Pilot Pressure | |
|
|
|
|
Stick Cylinder Retract Speed Limit Maximum Pilot Pressure | |
|
|
|
|
Stick Cylinder Extend Speed Limit Start Pilot Pressure | |
|
|
|
|
Stick Cylinder Extend Speed Limit Maximum Pilot Pressure | |
|
|
|
|
Boom Down Regeneration Valve Maximum Pilot Pressure | |
|
|
|
|
Tool Program Hydraulic Temperature High Warning Event Threshold | |
|
|
|
|
Attachment Valve #3 Parameters | |||||
Tool Program Attachment Valve #3 Flow Setting | |
|
|
|
|
Tool Program Attachment Valve #3 Multi- Operation Additional Flow | |
|
|
|
|
Tool Program Attachment Valve #3 One Way/ Two Way Valve Mode | Two-Way | Two-Way | Two-Way | Two-Way | Two-Way |
Tool Program Attachment Valve #3 Maximum Extend Pressure | |
|
|
|
|
Tool Program Attachment Valve #3 Maximum Retract Pressure | |
|
|
|
|
Multiple Operation Maximum Extend Pilot Pressure for Attachment Valve #3 | |
|
|
|
|
Multiple Operation Maximum Retract Pilot Pressure for Attachment Valve #3 | |
|
|
|
|
Tool Program Attachment Valve #3 Open Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #3 Close Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #3 Tool Flow Direction | Normal | Normal | Normal | Normal | Normal |
Caterpillar Information System:
C6.6 Industrial Engine Water Separator and Fuel Filter (Primary) - Remove and Install
2010/12/13 A New Bolt Is Now Used to Secure the Rocker Arm Shaft on Certain C27 and C32 Engines {1102, 1123, 1292, 7553}
C6.6 Industrial Engine Flow Control Valve - Remove and Install
A Quality Problem Is Identified on Friction Disc on Certain Caterpillar Products{3160} A Quality Problem Is Identified on Friction Disc on Certain Caterpillar Products{3160}
826K Landfill Compactor Severe Service Application
C13 Industrial Engine Product Description
C1.5 and C2.2 Industrial Engines Fan Clearance - Check
2010/11/05 Repair Procedure for Installing the Wastegate Cover Kit for Certain On-Highway Truck Engines {1052, 1053}
C1.5 and C2.2 Industrial Engines Fuel System Secondary Filter - Replace
C15 and C18 Engines Plate Locations and Film Locations
C13 Industrial Engine Model View Illustrations
C9.3 Tier 4 Final Engines Cleanliness of Fuel System Components
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Attachment Valves
C27 and C32 Engines for Caterpillar Built Machines ECM Does Not Communicate with Other Modules
C27 and C32 Engines for Caterpillar Built Machines Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C7.1 Industrial Engine Relief Valve (Fuel) - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - NRS Intake
C27 and C32 Engines for Caterpillar Built Machines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - NRS Differential Pressure
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Pilot Pressure Limit
C1.5 and C2.2 Industrial Engines Safety Messages
C1.5 and C2.2 Industrial Engines Model View Illustrations - Engines and Aftertreatment
3306B Generator Set Product Lifting
2010/12/06 A New Throttle Actuator Is Used for Some G3500 and G3500B Engines {1265, 1716}
C1.5 and C2.2 Industrial Engines Engine Electronics