A New Throttle Actuator Is Used for Some G3500 and G3500B Engines {1265, 1716}
- Engine:
- G3516 (S/N: CTL1-UP)
- Power Module:
- PMG3516 (S/N: CFD1-UP)
- G3516B (S/N: ZBB1-UP)
- G3516B (S/N: CSC1-UP)
- G3516B (S/N: ZBC1-UP)
- G3516B (S/N: CME1-UP)
- G3516B (S/N: CEY1-UP; 7EZ1-UP)
- G3516B (S/N: CTW1-UP)
- G3520B (S/N: CWD1-UP)
- G3520B (S/N: GZP1-UP)
Description of Change: The new actuator has a lead wire coil with an MS connector and a solenoid that provides increased stability over the previous actuator and solenoid.
Adaptable To: The new 325-5346 Electronic Actuator Gp replaces the original 211-8175 Electronic Actuator Gp in the above engines. The 211-8175 Electronic Actuator Gp is not canceled.
Show/hide table
| Effectivity for the 325-5346 |
| S/N:7EZ00320 |
| S/N:CEY00165 |
| S/N:CTW00614 |
| S/N:CTL00209 |
| S/N:CME00301 |
| S/N:CSC00415 |
| S/N:ZBB00389 |
| S/N:ZBC00215 |
| S/N:CWD00118 |
| S/N:GZP00132 |
| S/N:CFD00301 |
Caterpillar Information System:
3306B Generator Set Product Lifting
C1.5 and C2.2 Industrial Engines Model View Illustrations - Engines and Aftertreatment
C1.5 and C2.2 Industrial Engines Safety Messages
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Pilot Pressure Limit
C27 and C32 Engines for Caterpillar Built Machines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - NRS Differential Pressure
C27 and C32 Engines for Caterpillar Built Machines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - NRS Intake
C7.1 Industrial Engine Relief Valve (Fuel) - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines ECM Does Not Communicate with Other Modules
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Attachment Valves
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Medium Pressure: Default Value of Work Tool Parameters
C6.6 Industrial Engine Water Separator and Fuel Filter (Primary) - Remove and Install
C1.5 and C2.2 Industrial Engines Engine Electronics
C6.6 Industrial Engine Exhaust Back Pressure Valve - Remove and Install
C9.3 Tier 4 Final Engines Turbocharger
D6T Track-Type Tractor Engine Air Precleaner - Clean
12M Motor Grader Engine Starting
C1.5 and C2.2 Industrial Engines Emissions Certification Film
12M, 140M and 160M Motor Graders Hydraulic and Steering System Solenoid Valve (Blade Cushion)
C1.5 and C2.2 Industrial Engines Sensors and Electrical Components - Engine and Aftertreatment
G3512E and G3520E Generator Set Engines Electronic Control Module (ECM)
3516C Locomotive Engines Control Cabinet - Disassemble
3516C Locomotive Engines Control Cabinet - Assemble
C6.6 Industrial Engine Flexible Exhaust Pipe - Remove and Install