12M, 140M and 160M Motor Graders Hydraulic and Steering System Caterpillar


Solenoid Valve (Blade Cushion)

Usage:

12M B92


Illustration 1g03036097

Table 1
Specification for 320-8117 Solenoid Valve Gp 
Item  Qty  Part  Specification Description 
257-5022 Coil  24VDC 
32 ± 1.6 ohms at 20° C (68° F)
320-8117 Solenoid Valve Gp  Torque to 169 ± 7 N·m (124.6 ± 5.2 lb ft)
Torque nut to 9.5 ± 1.5 N·m (85 ± 13 lb in).

Caterpillar Information System:

C1.5 and C2.2 Industrial Engines Emissions Certification Film
12M Motor Grader Engine Starting
D6T Track-Type Tractor Engine Air Precleaner - Clean
C9.3 Tier 4 Final Engines Turbocharger
C6.6 Industrial Engine Exhaust Back Pressure Valve - Remove and Install
C1.5 and C2.2 Industrial Engines Engine Electronics
2010/12/06 A New Throttle Actuator Is Used for Some G3500 and G3500B Engines {1265, 1716}
3306B Generator Set Product Lifting
C1.5 and C2.2 Industrial Engines Model View Illustrations - Engines and Aftertreatment
C1.5 and C2.2 Industrial Engines Safety Messages
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Pilot Pressure Limit
C27 and C32 Engines for Caterpillar Built Machines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - NRS Differential Pressure
C1.5 and C2.2 Industrial Engines Sensors and Electrical Components - Engine and Aftertreatment
G3512E and G3520E Generator Set Engines Electronic Control Module (ECM)
3516C Locomotive Engines Control Cabinet - Disassemble
3516C Locomotive Engines Control Cabinet - Assemble
C6.6 Industrial Engine Flexible Exhaust Pipe - Remove and Install
C6.6 Industrial Engine Exhaust Elbow - Remove and Install
C1.5 and C2.2 Industrial Engines Refill Capacities and Recommendations
C27 and C32 Industrial Engines Rear Power Take-Off (RPTO) - Remove
EMCP4.3/4.4 Pulse Width Modulated Output Programming
EMCP4.1/EMCP4.2 General Information
EMCP4.1/EMCP4.2 Service Tools
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Variable Relief Valves
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.