Turbocharger
Show/hide table
Illustration 1 | g02671216 |
Show/hide table
Specification for 339-5356 Turbocharger Gp | |||
Item | Qty | Part | Specification Description |
1 | 4 | 9X-6620 Locknut | Before assembly, lubricate the threads and the washer face of the locknut with Loctite C5A copper anti-seize. |
Torque to |
Show/hide table
Illustration 2 | g02671238 |
Show/hide table
Specification for 339-5356 Turbocharger Gp | |||
Item | Qty | Part | Specification Description |
2 | 1 | 361-7981 Band Clamp | Use the following procedure in order to tighten the turbine clamp assembly: |
1. Tighten the band clamp to |
|||
2. Loosen the band clamp by one to two turns. | |||
3. Again, tighten the band clamp to |
|||
3 | 1 | 239-5858 Compressor Clamp Assembly | Torque to |
Caterpillar Information System:
C6.6 Industrial Engine Exhaust Back Pressure Valve - Remove and Install
C1.5 and C2.2 Industrial Engines Engine Electronics
2010/12/06 A New Throttle Actuator Is Used for Some G3500 and G3500B Engines {1265, 1716}
3306B Generator Set Product Lifting
C1.5 and C2.2 Industrial Engines Model View Illustrations - Engines and Aftertreatment
C1.5 and C2.2 Industrial Engines Safety Messages
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Pilot Pressure Limit
C27 and C32 Engines for Caterpillar Built Machines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - NRS Differential Pressure
C27 and C32 Engines for Caterpillar Built Machines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - NRS Intake
C7.1 Industrial Engine Relief Valve (Fuel) - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines ECM Does Not Communicate with Other Modules
D6T Track-Type Tractor Engine Air Precleaner - Clean
12M Motor Grader Engine Starting
C1.5 and C2.2 Industrial Engines Emissions Certification Film
12M, 140M and 160M Motor Graders Hydraulic and Steering System Solenoid Valve (Blade Cushion)
C1.5 and C2.2 Industrial Engines Sensors and Electrical Components - Engine and Aftertreatment
G3512E and G3520E Generator Set Engines Electronic Control Module (ECM)
3516C Locomotive Engines Control Cabinet - Disassemble
3516C Locomotive Engines Control Cabinet - Assemble
C6.6 Industrial Engine Flexible Exhaust Pipe - Remove and Install
C6.6 Industrial Engine Exhaust Elbow - Remove and Install
C1.5 and C2.2 Industrial Engines Refill Capacities and Recommendations
C27 and C32 Industrial Engines Rear Power Take-Off (RPTO) - Remove