1989/10/23 Caterpillar


New Water Level Gauge Group For Folded Core Radiators{1353,7422,7479}

Usage:


3500 Family Of Industrial And Generator Set Engines

Description of Change: The new water level gauge group for folded core radiators is mounted in a different location. The switch is mounted behind the top tank rather than to the side. This allows easier access to the gauge for reading.

Adaptable To: The new 9Y7579 and 9Y7695 Water Level Gauge Groups are a direct replacement for the former 7W9698 Water Level Gauge Group which has been canceled. The chart identifies which water level gauge group to use with each radiator group.


9Y7579 Gauge Group.

Caterpillar Information System:

1989/10/23 New Crankshaft Counterweight Bolt And Washer Used{1231}
1989/10/23 New Spacer Used In Alternator Belt Guard Group{7168}
1989/10/23 Hand Tool List For 3114 And 3116 Engines{0600,0701}
1989/10/23 How to Prevent Exhaust Valve Failures on D348 Engines{1105}
1989/10/16 New Fuel Injector Assemblies Used{1290}
1989/10/09 Cleaning Instructions For Intake Air Filters In Silencer Group {1051,1087}
1989/10/09 Use Fire Resistant Hydraulic Elements To Help Clean Contaminated Hydraulic Systems {5050,5068}
1989/10/02 Updated List Of Charts And Decals Available For Lubrication And Maintenance Intervals{0374,0375,7500,7557,7580}
1989/10/02 Fuel Injector Reference For 3500 Family Of Engines{1290}
1989/10/02 New Service Tools Available{0600,0700}
1989/09/25 Gauge Your Technical Knowledge-New Feature Covers Variety of Service Topics{0315,0110,0111,0113,5050}
1989/09/25 Setting the Governor Load Stop Output Dimension For More Than 9.00 mm{0782,1257,1265}
1989/10/23 New Shaft Assembly And Lever Assembly Used In Air Shut-Off Group{7418,1078}
1989/10/23 New Nut For Lifting Eye Bracket{1122}
1989/10/30 Understanding Four-Wire Windshield Wiper Motors (12 & 24 V){7305,1408}
1989/10/30 New Service Tools Available{0600,0700}
1989/10/30 Service Program Modules Must Be Ordered By Literature Form Numbers{1705,7494}
1989/10/30 Exhaust Manifold Gasket Removed From Between Exhaust Sleeve And Manifold Section{1059}
1989/10/30 New MG507 And MG507A Marine Gear Groups; New Marine Transmission Mounting Group{3354,3279}
1989/10/30 New Connecting Rod and Main Bearing Kits Available{1230,1203,1219}
1989/10/30 Two Remote Instrument Panels Available: Conventional and EMCP{7002}
1989/11/06 Procedure To Lessen Governor Control Lever Effort{1265}
1989/11/06 Narrow Wear Rings Now Used On All Hydraulic Cylinder Rods{4303}
1989/11/06 Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts{1203,1225,1231}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.