1989/10/02 Caterpillar


Updated List Of Charts And Decals Available For Lubrication And Maintenance Intervals{0374,0375,7500,7557,7580}

Usage:


SUPPLEMENT: 08/06/90

SERVICE MAGAZINE; OCTOBER 2, 1989; PAGE 17; "Updated List Of Charts And Decals Available For Lubrication And Maintenance Intervals". Disregard this article and make reference to the new article with the same title in this issue.

--------------- END SUPPLEMENT ---------------

This article supersedes the following Service Magazine articles:

...February 29, 1988; Page 13; "List of Engine Wall Charts Available" on D379, D398, D399, 3300, 3400, 3500 Families of Engines.

...June 27, 1988; Page 3; "Charts and Decals Available for Lubrication and Maintenance Intervals."

...November 28, 1988; Page 5; "More Charts And Decals Available For Lubrication And Maintenance Intervals."

...March 6, 1989; Page 6; "New Engine Wall Charts Give Maintenance Management Recommendations" for D379, D398, D399, 3114, 3116, 3208, 3300, 3400, 3500 Families of Industrial, Marine and Generator Set Engines.

More lubrication and maintenance interval charts and decals are available. The charts give service hour intervals, locations, lubricants, refill capacities and daily walk-around inspection procedures. The charts are produced on oil and tear resistant loose-leaf sheets.

The decals contain service hour intervals, locations, lubricants and refill capacities and can be placed on the machine.

The charts list all form numbers available at this time and will be updated as more become available for other products.

NOTE: Some old separate "Daily Walk-Around Inspection" and "Lubrication and Maintenance" charts have been discontinued and replaced by new charts that contain both sets of information (on opposite sides).

Caterpillar Information System:

1989/10/02 Fuel Injector Reference For 3500 Family Of Engines{1290}
1989/10/02 New Service Tools Available{0600,0700}
1989/09/25 Gauge Your Technical Knowledge-New Feature Covers Variety of Service Topics{0315,0110,0111,0113,5050}
1989/09/25 Setting the Governor Load Stop Output Dimension For More Than 9.00 mm{0782,1257,1265}
1989/09/25 Improved Turbocharger Outlet Gasket{1052,1061}
1989/09/25 Improved Support Assembly Used In Water Lines Group{1380}
1989/09/25 New Gasket Used On Oil Regulator Housing{1393,1330}
1989/09/18 New Seal Group Used In Water Pump Group{1361}
1989/09/18 Spindle In Centrifugal Lube Filter Group Now Serviced As Part Of Body Assembly{1318,1306}
1989/09/18 Procedure To Wash Turbochargers On Engines Powered By Residual Fuel{1052}
1989/09/18 New Collar Used In Fuel Injection Control Groups{1298}
1989/09/18 New Design Alternator Belt Used{1405,1406}
1989/10/09 Use Fire Resistant Hydraulic Elements To Help Clean Contaminated Hydraulic Systems {5050,5068}
1989/10/09 Cleaning Instructions For Intake Air Filters In Silencer Group {1051,1087}
1989/10/16 New Fuel Injector Assemblies Used{1290}
1989/10/23 How to Prevent Exhaust Valve Failures on D348 Engines{1105}
1989/10/23 Hand Tool List For 3114 And 3116 Engines{0600,0701}
1989/10/23 New Spacer Used In Alternator Belt Guard Group{7168}
1989/10/23 New Crankshaft Counterweight Bolt And Washer Used{1231}
1989/10/23 New Water Level Gauge Group For Folded Core Radiators{1353,7422,7479}
1989/10/23 New Shaft Assembly And Lever Assembly Used In Air Shut-Off Group{7418,1078}
1989/10/23 New Nut For Lifting Eye Bracket{1122}
1989/10/30 Understanding Four-Wire Windshield Wiper Motors (12 & 24 V){7305,1408}
1989/10/30 New Service Tools Available{0600,0700}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.