New Nut For Lifting Eye Bracket{1122}
Usage:
3606 ( 8RB ),
3608 ( 6MC ),
3612 ( 9RC ),
3616 ( 1PD ) Industrial Engines
Description of Change: The jam nuts that fasten the lifting eye bracket to the cylinder head have been replaced with a full nut. This will make it easier to tighten the nuts to the correct torque. The full nut is slotted to prevent fluids from collecting on the cylinder head studs. See Illustration 1 and 2.
Illustration 1. Location of nut on vee engine.
Illustration 2. Location of nut on in-line engine.
Adaptable To: The 9X6003 Nut is a direct replacement for the 6V5169 Nut in the engine lifting groups.
Caterpillar Information System:
1989/10/23 New Shaft Assembly And Lever Assembly Used In Air Shut-Off Group{7418,1078}
1989/10/23 New Water Level Gauge Group For Folded Core Radiators{1353,7422,7479}
1989/10/23 New Crankshaft Counterweight Bolt And Washer Used{1231}
1989/10/23 New Spacer Used In Alternator Belt Guard Group{7168}
1989/10/23 Hand Tool List For 3114 And 3116 Engines{0600,0701}
1989/10/23 How to Prevent Exhaust Valve Failures on D348 Engines{1105}
1989/10/16 New Fuel Injector Assemblies Used{1290}
1989/10/09 Cleaning Instructions For Intake Air Filters In Silencer Group {1051,1087}
1989/10/09 Use Fire Resistant Hydraulic Elements To Help Clean Contaminated Hydraulic Systems {5050,5068}
1989/10/02 Updated List Of Charts And Decals Available For Lubrication And Maintenance Intervals{0374,0375,7500,7557,7580}
1989/10/02 Fuel Injector Reference For 3500 Family Of Engines{1290}
1989/10/02 New Service Tools Available{0600,0700}
1989/10/30 Understanding Four-Wire Windshield Wiper Motors (12 & 24 V){7305,1408}
1989/10/30 New Service Tools Available{0600,0700}
1989/10/30 Service Program Modules Must Be Ordered By Literature Form Numbers{1705,7494}
1989/10/30 Exhaust Manifold Gasket Removed From Between Exhaust Sleeve And Manifold Section{1059}
1989/10/30 New MG507 And MG507A Marine Gear Groups; New Marine Transmission Mounting Group{3354,3279}
1989/10/30 New Connecting Rod and Main Bearing Kits Available{1230,1203,1219}
1989/10/30 Two Remote Instrument Panels Available: Conventional and EMCP{7002}
1989/11/06 Procedure To Lessen Governor Control Lever Effort{1265}
1989/11/06 Narrow Wear Rings Now Used On All Hydraulic Cylinder Rods{4303}
1989/11/06 Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts{1203,1225,1231}
1989/11/06 Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool{0706,0782,1264}
1989/11/13 Engine Coolant Can Be Recycled{1395}