Two Remote Instrument Panels Available: Conventional and EMCP{7002}
Usage:
3200, 3300, 3400, 3500 Package Generator Sets
There are two remote instrument panels available and from the front they look the same. The 7C5130 Instrument Panel Group is for the electronic modular control panel (EMCP). The 7C3085 Instrument Panel Group is for the conventional control panel. The manufacturer of these panels provides a foil label with the Caterpillar part number on the inside of the front cover.
The internal wiring, to connect the remote instrument panel to the generator control panel, is different for the EMCP and the conventional control panels. So, the instrument panel group must match the generator control panel.
Location of foil label with part number.
Caterpillar Information System:
1989/10/30 New Connecting Rod and Main Bearing Kits Available{1230,1203,1219}
1989/10/30 New MG507 And MG507A Marine Gear Groups; New Marine Transmission Mounting Group{3354,3279}
1989/10/30 Exhaust Manifold Gasket Removed From Between Exhaust Sleeve And Manifold Section{1059}
1989/10/30 Service Program Modules Must Be Ordered By Literature Form Numbers{1705,7494}
1989/10/30 New Service Tools Available{0600,0700}
1989/10/30 Understanding Four-Wire Windshield Wiper Motors (12 & 24 V){7305,1408}
1989/10/23 New Nut For Lifting Eye Bracket{1122}
1989/10/23 New Shaft Assembly And Lever Assembly Used In Air Shut-Off Group{7418,1078}
1989/10/23 New Water Level Gauge Group For Folded Core Radiators{1353,7422,7479}
1989/10/23 New Crankshaft Counterweight Bolt And Washer Used{1231}
1989/10/23 New Spacer Used In Alternator Belt Guard Group{7168}
1989/10/23 Hand Tool List For 3114 And 3116 Engines{0600,0701}
1989/11/06 Procedure To Lessen Governor Control Lever Effort{1265}
1989/11/06 Narrow Wear Rings Now Used On All Hydraulic Cylinder Rods{4303}
1989/11/06 Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts{1203,1225,1231}
1989/11/06 Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool{0706,0782,1264}
1989/11/13 Engine Coolant Can Be Recycled{1395}
1989/11/13 New 3161 Marine Governor Provides Better Low Idle Stability{1264}
1989/11/13 New Gasket With Stainless Steel Flange Used In Exhaust Manifold Group{1059}
1989/11/13 Cylinder Liner Changes{1216}
1989/11/20 Effective Dates, Serial Numbers and Features Of PEEC Personality Modules{1705,1707}
1989/11/27 Spark Plug Gasket Available{1550,1555}
1989/11/27 New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections{1059,1070}
1989/11/27 Improved Turbocharger Wash Water Lines Group Available On Engines Powered By Residual (Heavy) Fuel{1052}