Power Converter (CAB) - Remove and Install
拆卸步骤
- 将电源断路开关转至断开位置。
- 拆下螺钉 (1) 。 将后盖 (2) 放到一边。
Show/hide table
图 1 | g02043553 |
- 拆下螺钉 (3) 。 拆下托盘 (4) 。
Show/hide table
图 2 | g02043555 |
- 拆下螺钉 (5) 。 拆下导管 (6) 。
Show/hide table
图 3 | g02043853 |
- 拆下螺钉 (7) 。 拆下后面板 (8) 。
Show/hide table
图 4 | g02043556 |
- 断开线束组件 (9) 。 卸下螺钉 (10) 。 拆下变压器 (11) 。
Show/hide table
图 5 | g02043873 |
安装步骤
- 按相反顺序安装变压器 (11) 。
Caterpillar Information System:
349F and 352F Excavators Cab Door
C9.3 Tier 4 Interim Engines Power Is Intermittently Low or Power Cutout Is Intermittent
C9.3 Tier 4 Interim Engines Fuel Pressure Is High
2010/01/25 Installing Orifice Plates in some G3520C Landfill Engines {1063, 1380}
349F and 352F Excavators Power Receptacle - If Equipped
2009/12/09 A New Undersized Connecting Rod Bearing Is Available for All C27 and C32 Engines {1225}
C13, C15, and C18 Tier 4 Final Engines Pressure Sensor (DPF Inlet)
349F and 352F Excavators Operation Information
349F and 352F Excavators Equipment Lowering with Engine Stopped
C9.3 Tier 4 Interim Engines Fuel Pressure Is Low
349F and 352F Excavators Stopping the Engine
Reuse and Salvage of 3208 Engine Sleeve Metering Fuel Systems (SMFS) {0374, 1250} Reuse and Salvage of 3208 Engine Sleeve Metering Fuel Systems (SMFS) {0374, 1250}
C9.3 Engines for Caterpillar Built Machines Fuel Temperature Is High
Replacement of High Pressure Fuel Lines on C7 On-highway Engines{1252, 1254} Replacement of High Pressure Fuel Lines on C7 On-highway Engines{1252, 1254}
3508, 3512 and 3516 Generator Set Engines Piston Cooling Jets - Remove and Install
349F and 352F Excavators Joystick Controls Alternate Patterns
3508, 3512 and 3516 Generator Set Engines Pistons and Connecting Rods - Remove
3508, 3512 and 3516 Generator Set Engines Pistons and Connecting Rods - Install
3508, 3512 and 3516 Generator Set Engines Cylinder Liner - Remove
3508, 3512 and 3516 Generator Set Engines Cylinder Liner - Install
2009/12/09 Fuel Injection Pump Gear on 3054C, C3.3, C6.6, C4.4 and C4.4 (Mech) Engines {1251, 1290}
2010/01/08 Fuel Injection Pump Gear on 3054C, C3.3, C6.6, C4.4 and C4.4 (Mech) Engines {1251}
793F Off-Highway Truck Machine Systems Magnetic Switch (Main Power) - Remove and Install
Installation of the Synchronization Module{4480} Installation of the Synchronization Module{4480}