2010/01/25 Caterpillar


Installing Orifice Plates in some G3520C Landfill Engines {1063, 1380}

Usage:

G3520C GZJ
Engine:
G3520C (S/N: GZJ1-UP)
G3520C (S/N: HAT1-UP)

Description of Change: Additional piping and orifices will increase the flow of jacket water coolant through the first stage aftercooler section. The increased flow will lead to a decrease in temperatures of the air/fuel mixture that enters the intake manifold.

Adaptable To:




Illustration 1g02069313

Orifice locations

(1) 323-5835 Orifice Plate

(2) 323-5836 Orifice Plate

Table 1
Item     Qty     Part Number     Part Name    
1     1     200-6434     Tube As    
2     2     305-3447     Seal    
3     1     323-5835     Orifice Plate    
4     1     323-5836     Orifice Plate    
5     1     330-4907     Elbow    
6     2     4N-1320     Gasket    
7     1     6V-1454     O-Ring Seal    
8     3     6V-5066     O-Ring Seal    
9     1     6v-5139     O-Ring Seal    
10     2     7N-4945     Gasket    
11     2     8T-1919     O-Ring Seal    
12     1     9Y-6893     Gasket    

This change is effective beginning with GZL00418-UP.

Caterpillar Information System:

349F and 352F Excavators Power Receptacle - If Equipped
2009/12/09 A New Undersized Connecting Rod Bearing Is Available for All C27 and C32 Engines {1225}
C13, C15, and C18 Tier 4 Final Engines Pressure Sensor (DPF Inlet)
349F and 352F Excavators Operation Information
349F and 352F Excavators Equipment Lowering with Engine Stopped
C9.3 Tier 4 Interim Engines Fuel Pressure Is Low
349F and 352F Excavators Stopping the Engine
Reuse and Salvage of 3208 Engine Sleeve Metering Fuel Systems (SMFS) {0374, 1250} Reuse and Salvage of 3208 Engine Sleeve Metering Fuel Systems (SMFS) {0374, 1250}
UPSB130 Uninterruptible Power Supply Walk-Around Inspection
797F Off-Highway Truck Steering System Center Arm (Steering) - Adjust
UPSB130 Uninterruptible Power Supply Modes Of Operation
C9.3 Industrial Engine Soot Antenna
C9.3 Tier 4 Interim Engines Fuel Pressure Is High
C9.3 Tier 4 Interim Engines Power Is Intermittently Low or Power Cutout Is Intermittent
349F and 352F Excavators Cab Door
797F and 797F XQ Off-Highway Trucks Machine Systems Power Converter (CAB) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Fuel Temperature Is High
Replacement of High Pressure Fuel Lines on C7 On-highway Engines{1252, 1254} Replacement of High Pressure Fuel Lines on C7 On-highway Engines{1252, 1254}
3508, 3512 and 3516 Generator Set Engines Piston Cooling Jets - Remove and Install
349F and 352F Excavators Joystick Controls Alternate Patterns
3508, 3512 and 3516 Generator Set Engines Pistons and Connecting Rods - Remove
3508, 3512 and 3516 Generator Set Engines Pistons and Connecting Rods - Install
3508, 3512 and 3516 Generator Set Engines Cylinder Liner - Remove
3508, 3512 and 3516 Generator Set Engines Cylinder Liner - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.