Magnetic Switch (Main Power) - Remove and Install
拆卸步骤
- 将电源断路开关转至断开位置。
- 拆下螺钉 (1) 。 拆下后盖 (2) 。
Show/hide table
图 1 | g02044133 |
- 拆下螺钉 (3) 。 拆下托盘 (4) 。
Show/hide table
图 2 | g02044135 |
- 拆下螺钉 (5) 。 拆下导管 (6) 。
Show/hide table
图 3 | g02044154 |
- 拆下螺钉 (7) 。 拆下后面板 (8) 。
Show/hide table
图 4 | g02044158 |
- 断开线束组件 (9) 。 断开电缆组件 (10) 。 拆下螺栓 (11) 。 拆下电磁开关 (12) 。
Show/hide table
图 5 | g02044174 |
安装步骤
- 按相反顺序安装磁开关 (12) 。
- 将电缆组件 (10) 上紧到 6 ± 5 N·m (53 ± 4 lb in) 的扭矩。
Caterpillar Information System:
2010/01/08 Fuel Injection Pump Gear on 3054C, C3.3, C6.6, C4.4 and C4.4 (Mech) Engines {1251}
2009/12/09 Fuel Injection Pump Gear on 3054C, C3.3, C6.6, C4.4 and C4.4 (Mech) Engines {1251, 1290}
3508, 3512 and 3516 Generator Set Engines Cylinder Liner - Install
3508, 3512 and 3516 Generator Set Engines Cylinder Liner - Remove
3508, 3512 and 3516 Generator Set Engines Pistons and Connecting Rods - Install
3508, 3512 and 3516 Generator Set Engines Pistons and Connecting Rods - Remove
349F and 352F Excavators Joystick Controls Alternate Patterns
3508, 3512 and 3516 Generator Set Engines Piston Cooling Jets - Remove and Install
Replacement of High Pressure Fuel Lines on C7 On-highway Engines{1252, 1254} Replacement of High Pressure Fuel Lines on C7 On-highway Engines{1252, 1254}
C9.3 Engines for Caterpillar Built Machines Fuel Temperature Is High
797F and 797F XQ Off-Highway Trucks Machine Systems Power Converter (CAB) - Remove and Install
349F and 352F Excavators Cab Door
Installation of the Synchronization Module{4480} Installation of the Synchronization Module{4480}
793F Off-Highway Truck Machine Systems Display Module - Remove and Install
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176} Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
793F Off-Highway Truck Machine Systems Electronic Control Module (Advisor) - Remove and Install - VIMS
C18 Generator Set Exciter - Remove and Install
3508, 3512 and 3516 Generator Set Engines Camshaft - Remove
C9.3 Tier 4 Final Engines Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Pressure Sensor (ARD Combustion Air)
793F Off-Highway Truck Machine Systems Electronic Control Module (Road Analysis Control) - Remove and Install
C9.3 Tier 4 Final Engines Temperature Sensor (DPF Inlet, Flame Detect)
D6T Track Type Tractor Machine Systems Mounting Straps
793F Off-Highway Truck Machine Systems Electronic Control Module (Power Train) - Remove and Install