Engine Oil Pan
Show/hide table
Illustration 1 | g02032994 |
Right side front sump |
Show/hide table
Illustration 2 | g02033153 |
Left side front sump |
(1) Torque for the four plugs ...
Caterpillar Information System:
C18 Marine Engine Maintenance Interval Schedule
C32 Auxiliary Engine Emergency Stopping
3508, 3512 and 3516 Generator Set Engines Connecting Rod Bearings - Remove and Install
3508, 3512 and 3516 Generator Set Engines Cylinder Head - Assemble
C175-16 PETROLEUM ENGINES Flywheel - Remove and Install
3508, 3512 and 3516 Generator Set Engines Cylinder Head - Disassemble
2010/01/13 New Flame Detection Temperature Sensors Are Available for Certain C13 and C15 On-Highway Engines {108B, 108E, 108M}
2009/12/01 A New Heat Shield Is Available for Some C18 Engines {1067}
C13, C15, and C18 Tier 4 Interim Engines Shutdown (Ground Level) - Test
349F and 352F Excavators Air Conditioning and Heating Control
C7.1 Industrial Engine and Generator Set Diesel Particulate Filter Temperature Is High
793F Off-Highway Truck Engine Supplement Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
C13 Industrial Engines Engine Oil Pan
C13 Industrial Engines Engine Oil Pan
3508, 3512 and 3516 Generator Set Engines Balancer Group (Front) - Remove and Install - 3508 Engine
G3500B Engines Engine Governing - Adjust
Hydraulic Excavator Idler Disassembly and Assembly Procedures {0729, 4159} Hydraulic Excavator Idler Disassembly and Assembly Procedures {0729, 4159}
2009/12/03 Gasket for the Water Pump on 3054C, 3054E, C4.4 and C6.6 Engines {1361, 1395, 7555}
3508, 3512 and 3516 Generator Set Engines Gear Group (Rear) - Remove and Install
120M, 12M, 140M and 160M Motor Graders Machine Systems Position Sensor (Articulation)
CG137-08 and CG137-12 Industrial Engines Gas Pressure Regulator
UPSB130 Uninterruptible Power Supply Regulatory Compliance
C13, C15, and C18 Engines for Caterpillar Built Machines Cooling Fan - Calibrate
UPSB130 Uninterruptible Power Supply General Hazard Information