Engine Oil Pan
Show/hide table
| |
| Illustration 1 | g02033640 |
|
Right side rear sump | |
Show/hide table
| |
| Illustration 2 | g02033211 |
|
Left side rear sump | |
(1) Torque for the four plugs ...
Caterpillar Information System:
C13 Industrial Engines Engine Oil Pan
C18 Marine Engine Maintenance Interval Schedule
C32 Auxiliary Engine Emergency Stopping
3508, 3512 and 3516 Generator Set Engines Connecting Rod Bearings - Remove and Install
3508, 3512 and 3516 Generator Set Engines Cylinder Head - Assemble
C175-16 PETROLEUM ENGINES Flywheel - Remove and Install
3508, 3512 and 3516 Generator Set Engines Cylinder Head - Disassemble
2010/01/13 New Flame Detection Temperature Sensors Are Available for Certain C13 and C15 On-Highway Engines {108B, 108E, 108M}
2009/12/01 A New Heat Shield Is Available for Some C18 Engines {1067}
C13, C15, and C18 Tier 4 Interim Engines Shutdown (Ground Level) - Test
349F and 352F Excavators Air Conditioning and Heating Control
C7.1 Industrial Engine and Generator Set Diesel Particulate Filter Temperature Is High
C13 Industrial Engines Engine Oil Pan
3508, 3512 and 3516 Generator Set Engines Balancer Group (Front) - Remove and Install - 3508 Engine
G3500B Engines Engine Governing - Adjust
Hydraulic Excavator Idler Disassembly and Assembly Procedures {0729, 4159} Hydraulic Excavator Idler Disassembly and Assembly Procedures {0729, 4159}
2009/12/03 Gasket for the Water Pump on 3054C, 3054E, C4.4 and C6.6 Engines {1361, 1395, 7555}
3508, 3512 and 3516 Generator Set Engines Gear Group (Rear) - Remove and Install
120M, 12M, 140M and 160M Motor Graders Machine Systems Position Sensor (Articulation)
CG137-08 and CG137-12 Industrial Engines Gas Pressure Regulator
UPSB130 Uninterruptible Power Supply Regulatory Compliance
C13, C15, and C18 Engines for Caterpillar Built Machines Cooling Fan - Calibrate
UPSB130 Uninterruptible Power Supply General Hazard Information
UPSB130 Uninterruptible Power Supply Product Identification