New Flame Detection Temperature Sensors Are Available for Certain C13 and C15 On-Highway Engines {108B, 108E, 108M}
- Engine:
- C13 (S/N: LEE1-UP)
- C15 (S/N: SDP1-UP)
The new 334-1387 Temperature Sensor and 334-1388 Temperature Sensor are direct replacements for the existing 288-6820 Temperature Sensor and the 313-1449 Temperature Sensor. Refer to Table 1.
Show/hide table
| New Part Number | Description | Former Part Number |
| 334-1387 | Temperature Sensor | 288-6820 |
| 334-1388 | Temperature Sensor | 313-1449 |
Note: The old 288-6820 Temperature Sensor and the 313-1449 Temperature Sensor must not be used for parts replacement on serial number prefixes LEE and SDP. The new sensors must be used.
Note: The new flame detection temperature sensors must be used with a personality module in the engine software that has a release date of November 2008 or newer.
Caterpillar Information System:
2009/12/01 A New Heat Shield Is Available for Some C18 Engines {1067}
C13, C15, and C18 Tier 4 Interim Engines Shutdown (Ground Level) - Test
349F and 352F Excavators Air Conditioning and Heating Control
C7.1 Industrial Engine and Generator Set Diesel Particulate Filter Temperature Is High
793F Off-Highway Truck Engine Supplement Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
349F and 352F Excavators Seat
793F Off-Highway Truck Engine Supplement Piston Motor (Fan Drive) - Assemble
793F Off-Highway Truck Engine Supplement Piston Motor (Fan Drive) - Disassemble
349F and 352F Excavators Fire Extinguisher Location
2009/12/03 Processes Eliminate High Fuel Pressure Event Codes in the Low Pressure Fuel Systems of Certain C27 and C32 Industrial Engines {1261, 1274}
793F Off-Highway Truck Engine Supplement Piston Motor (Fan Drive) - Remove and Install
G3304B and G3306B Engines Engine Shutdown or Start Inhibit Initiated by Driven Equipment
3508, 3512 and 3516 Generator Set Engines Cylinder Head - Disassemble
C175-16 PETROLEUM ENGINES Flywheel - Remove and Install
3508, 3512 and 3516 Generator Set Engines Cylinder Head - Assemble
3508, 3512 and 3516 Generator Set Engines Connecting Rod Bearings - Remove and Install
C32 Auxiliary Engine Emergency Stopping
C18 Marine Engine Maintenance Interval Schedule
C13 Industrial Engines Engine Oil Pan
C13 Industrial Engines Engine Oil Pan
C13 Industrial Engines Engine Oil Pan
3508, 3512 and 3516 Generator Set Engines Balancer Group (Front) - Remove and Install - 3508 Engine
G3500B Engines Engine Governing - Adjust
Hydraulic Excavator Idler Disassembly and Assembly Procedures {0729, 4159} Hydraulic Excavator Idler Disassembly and Assembly Procedures {0729, 4159}