Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 185-3630 | Strap Wrench As | 1 |
- Turn fuel supply (1) to the OFF position.
Show/hide table
Illustration 2 g02030894 - Drain filter assembly (2) into a suitable container for storage or disposal.
- Use Tooling (A) in order to remove filter assembly (2). Disconnect hose assembly (3).
Show/hide table
Illustration 3 g02030917 - Remove bolts (4) and bolts (5). Remove filter base (6).
Show/hide table
Illustration 1 | g02030925 |
- Install filter base (6) and filter assembly (2) in the reverse order of removal.
Caterpillar Information System:
349F and 352F Excavators Seat
793F Off-Highway Truck Engine Supplement Piston Motor (Fan Drive) - Assemble
793F Off-Highway Truck Engine Supplement Piston Motor (Fan Drive) - Disassemble
349F and 352F Excavators Fire Extinguisher Location
2009/12/03 Processes Eliminate High Fuel Pressure Event Codes in the Low Pressure Fuel Systems of Certain C27 and C32 Industrial Engines {1261, 1274}
793F Off-Highway Truck Engine Supplement Piston Motor (Fan Drive) - Remove and Install
G3304B and G3306B Engines Engine Shutdown or Start Inhibit Initiated by Driven Equipment
C175-16 PETROLEUM ENGINES Valve Cover - Remove and Install
G3304B and G3306B Engines Shutdown - Test
793F Off-Highway Truck Engine Supplement Fan - Remove and Install
793F Off-Highway Truck Engine Supplement Prelubrication Oil Pump - Remove and Install
UPSB125 Uninterruptible Power Supply Power Supply - Replace
C7.1 Industrial Engine and Generator Set Diesel Particulate Filter Temperature Is High
349F and 352F Excavators Air Conditioning and Heating Control
C13, C15, and C18 Tier 4 Interim Engines Shutdown (Ground Level) - Test
2009/12/01 A New Heat Shield Is Available for Some C18 Engines {1067}
2010/01/13 New Flame Detection Temperature Sensors Are Available for Certain C13 and C15 On-Highway Engines {108B, 108E, 108M}
3508, 3512 and 3516 Generator Set Engines Cylinder Head - Disassemble
C175-16 PETROLEUM ENGINES Flywheel - Remove and Install
3508, 3512 and 3516 Generator Set Engines Cylinder Head - Assemble
3508, 3512 and 3516 Generator Set Engines Connecting Rod Bearings - Remove and Install
C32 Auxiliary Engine Emergency Stopping
C18 Marine Engine Maintenance Interval Schedule
C13 Industrial Engines Engine Oil Pan